Farm Equipment - OVERHAUL KITS

Print Page | Close Window

OVERHAUL KITS

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=8356
Printed Date: 19 Jan 2025 at 9:07am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: OVERHAUL KITS

Posted By: SIMPLICITY
Subject: OVERHAUL KITS
Date Posted: 19 Feb 2010 at 10:03pm

I WOULD LIKE TO KNOW WHO HAS THE BEST QUALITY OVERHAUL KIT FOR A 200 & 185

Replies:

Posted By: DrAllis
Date Posted: 21 Feb 2010 at 7:26am

Technically, a 200 and a 185 use different overhaul kits. The 200 from the factory was 15 to1 compression and all 180-185-190-190XT's were 16 to 1 compression ratio.

Posted By: SIMPLICITY
Date Posted: 21 Feb 2010 at 7:49pm

TO Dr ALLIS
HELLO
I KNOW THE KITS ARE DIFFERENT, I WAS A MECHANIC AT OUR ALLIS DEALERSHIP, MY QUESTION IS WHO MAKES THE BEST COMPONENTS IN AN OVERHAUL KIT, OTHER THAN AN OEM KIT

Posted By: norm [ind]
Date Posted: 21 Feb 2010 at 7:58pm

you get what you pay for in frame or out of frame vales etc . you did not say

we have 3 different kits 1-800-254-3116

Posted By: Cal
Date Posted: 21 Feb 2010 at 8:17pm

For al around high quality I would go with Hy-Capacity parts always Best USA components. Cal in Ct

Posted By: Hurst
Date Posted: 21 Feb 2010 at 9:08pm

I got a PowerMaxx kit for my 7000. The parts were all made in America or by big name companies (Clevite, Mahle, Hastings, etc, all companies I think make their parts in America). The pistons and sleeves are made in America also and everything seemed to be of very good quality and in spec. It is also a high compression (16.3:1) kit for the turbo diesel.

Hurst

-------------
1979 Allis Chalmers 7000
5800 Hours

Posted By: Don Buck
Date Posted: 22 Feb 2010 at 5:27am

NAPA

Posted By: Bill_MN
Date Posted: 22 Feb 2010 at 7:30pm

Tony's Tractors has some good engine kits with Clevite, Dura-bond, etc. parts might want to check them out

-------------
1951 WD #78283, 1918 Case 28x50 Thresher #76738, Case Centennial B 2x16 Plow

Posted By: mikeym2448
Date Posted: 24 Feb 2010 at 9:39am

Norms Antiques has good engine kits also

http://normsactractors.com/ - http://normsactractors.com/

-------------
mike meinert

Posted By: Brian Jasper co. Ia
Date Posted: 24 Feb 2010 at 1:34pm

I got A&I brand pistons and sleeves that were made in Iowa for my D17D.

-------------
"Any man who thinks he can be happy and prosperous by letting the government take care of him better take a closer look at the American Indian." Henry Ford