Farm Equipment - G spindle bushings

Print Page | Close Window

G spindle bushings

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=8343
Printed Date: 19 Jan 2025 at 12:23am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: G spindle bushings

Posted By: Bob-Maine
Subject: G spindle bushings
Date Posted: 19 Feb 2010 at 6:44pm

Time to put in the new front spindle bushings in the G I have been working on. Drove out the old bushings today and found that the lower bushings are half the length of the upper bushings. The four bushings I bought are the same length. The parts book shows them as one part number. So I cut one in half to do the bottoms. The spindle housings are bored to accept 1 1/4" bushing on top and 5/8" on the bottom.
Oh well, another of life's great mysterys.
Bob@allisdowneast