Garden Tractors - 10hp Briggs

Print Page | Close Window

10hp Briggs

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=83345
Printed Date: 21 Nov 2024 at 7:55pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 10hp Briggs

Posted By: L Hud
Subject: 10hp Briggs
Date Posted: 16 Jan 2014 at 5:45pm

Recently put a coil on the B10 when the mag went south. Also put in a new set of points. Now the exhaust will get red hot in a short time. Will this be caused by the points not adjusted to the correct gap? Any help appreciated. Hud

Replies:

Posted By: timflury
Date Posted: 16 Jan 2014 at 7:15pm

Yes it will.

Did you install a new condenser with the points?

-------------
When was the last time you thanked a veteran.

Posted By: L Hud
Date Posted: 16 Jan 2014 at 7:53pm

Yes I put all new. Points and condenser. Thanks for the reply. Hud

Posted By: gordonh
Date Posted: 16 Jan 2014 at 9:13pm

Adjustment of point is off. I think it is 1800. Could be the key in fly wheel partial stripped.

Posted By: ACmowerguy
Date Posted: 16 Jan 2014 at 10:29pm

Points should be gapped at 20 thousandths.

-------------
10 various B-series garden tractors, AC Homesteader8, 416 hydro,710 gt, 914, 916H, 917H, 920D, and many misc attachments

Posted By: L Hud
Date Posted: 17 Jan 2014 at 5:57am

Thanks guys. Hud

Posted By: HudCo
Date Posted: 21 Jan 2014 at 1:26pm

did you use briggs mag part number 298968 mag 26018 points 298060 condensor or did you wire up a 12 v coil it has have the timing way off probley retarded to far we had a customers model 32 briggs quit running and when we figured it out the flywheel magnet had changed polarity and had to find new flywheel but it would run almost firing on exhaust stroke

Posted By: L Hud
Date Posted: 23 Jan 2014 at 6:20am

I used a 12v. coil. I bypassed the mag and used the points to fire the coil. I sort of eyeballed the points. Have not gotten back to it yet. May be spring before I mess with it again. Thanks for the reply. Hud