fuel supply question
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=81915
Printed Date: 24 Nov 2024 at 6:57am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: fuel supply question
Posted By: rowcropmafia
Subject: fuel supply question
Date Posted: 17 Dec 2013 at 8:26pm
|
Building a 5.9 cummins and am looking at mechanical supply pump options. dont really want to spend 500+ on a waterman. Any hydraulic pump options out there or what are you guys using to feed your injection pumps?
|
Replies:
Posted By: O.P.S. Heads
Date Posted: 18 Dec 2013 at 6:18pm
There are a few options but basically you need a pump which will supply 3 GPM @ 1800 RPM if you drive it at crankshaft speed or a pump of around 6 GPM @ 1800 if it is driven at half of crank speed (front side of injection pump).
Here is a part number for a Tuthill pump which many use. It has it's own built in pressure regulator which is nice.
Tuthill part # 2LEV-CC
We use a Barnes pump from Northern hydraulic with an external regulator and get along fine. Much cheaper, but not as nice. You may call Schied diesel. They do a few Cummins applications. They may have something on the shelf that is a bolt on piece. Columbus Diesel also has supply pumps which work well with internal PSI regulators.
Happy hunting.
|
Posted By: rowcropmafia
Date Posted: 18 Dec 2013 at 7:45pm
|
I talked to mike at alkydiggers out of Nashville. Very nice guy, he was able to set me up with a rebuilt enderle pump. Seemed like his prices were good and has alot of inventory on hand.
|
|