Farm Equipment - 190 Power Director

Print Page | Close Window

190 Power Director

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=8191
Printed Date: 18 Jan 2025 at 9:05pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 190 Power Director

Posted By: farmboycitygirl
Subject: 190 Power Director
Date Posted: 16 Feb 2010 at 3:14pm

Is the power director the same for a 190 and a 190XT?

Replies:

Posted By: Lonn
Date Posted: 16 Feb 2010 at 3:45pm

I'd say yes. Never been into a straight 190 PD.

-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot

Posted By: DrAllis
Date Posted: 16 Feb 2010 at 6:18pm

They would be indentical except for possibly (check the parts book) the disc/plate count.....XT's and 200's are 5 discs in low and 4 discs in high......180/185 are 4 in low and 3 in high....a straight 190 may be 4 and 3 also due to lower HP........check the parts book to be sure.

Posted By: JC-WI
Date Posted: 16 Feb 2010 at 11:10pm

190/190XT overhaul book says 5/4. It also says that as the parts become obsolete to use 200 powerdirector clutch housing parts with the internals.

180/185 power director clutch housings must be just that much shorter to allow only 4/3 discs.