Extra Engine Parts in kit
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=8114
Printed Date: 18 Jan 2025 at 6:06pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Extra Engine Parts in kit
Posted By: Kraig (WI)
Subject: Extra Engine Parts in kit
Date Posted: 14 Feb 2010 at 8:24pm
|
I'm over hauling my WD. In the gasket kit, there are two grey felt seals that I'm not sure where they go. I think they go in the Rear oil seal upper retainer and in the wide grove behind the rear oil seal in the rear main bearing cap. But there wasn't any seal in those places originally, just the felt seal in the narrow groves.
Also, the ring kit had the bent wire things. It looks like they go under the oil seal, but I tried putting them in and it won't work there. The rings go in nice without those pieces. I am reringing the original 4" pistons.
Kraig (WI)
">  '>http://<a href="s82.photobucket.com/albums/j264/ACKraig/?action=view¤t=ExtraParts.jpg"><img src="i82.photobucket.com/albums/j264/ACKraig/ExtraParts.jpg" border="0" alt="WD Extra Parts"></a>------------- 7010,D17D,WD45,WD,WC,WC,B, Gleaner K,60,66,72 |
Replies:
Posted By: CTuckerNWIL
Date Posted: 15 Feb 2010 at 9:30am
|
My kit had 2 different rear seals. 1 was narrow for the WC block and maybe WD. The wider one was used on later engines. The seals will not fit without soaking in oil and compressing, then put them in the freezer overnight. The rings in my kit had instructions on how and where to install them. It's been too long to remember what the instructions said. ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |