Construction and other equipment - F50-24 PS Fork truck HELP!!!!!

Print Page | Close Window

F50-24 PS Fork truck HELP!!!!!

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=80900
Printed Date: 12 May 2024 at 6:59pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: F50-24 PS Fork truck HELP!!!!!

Posted By: cotncrzy
Subject: F50-24 PS Fork truck HELP!!!!!
Date Posted: 27 Nov 2013 at 6:28am

My mast cylinder is leaking like crazy. Where can I get parts, and info on a repair.

S/N 39384000

-------------
C, WD45,WD puller, 185, 200, 7060 Red Belly, 7060 Black Belly,8010, and a R52 Gleaner, AND PROUD OF THEM!

Replies:

Posted By: Ray54
Date Posted: 27 Nov 2013 at 10:52am

Your favorite parts store.Just don't say it is from a old machine that will not be in the computer.I like the Napa store because they have pictures in the parts catalogs that help match things.But also it depends on the attitude of management and front line employes.Good lucky,as I am sure they are out there.
Ray

Posted By: JohnCO
Date Posted: 27 Nov 2013 at 11:10am

I think he's talking about the cylinder for the mast, not the master cylinder. If so, I doubt NAPA would have the parts. I'd guess a hydraulic shop would be the best bet.

-------------
"If at first you don't succeed, get a bigger hammer"
Allis Express participant

Posted By: cotncrzy
Date Posted: 27 Nov 2013 at 1:01pm

Yes the mast cylinder. Is it a packing type fix or does the cylinder have to be disassembeled? Is there anywhere I can see a diagram?

-------------
C, WD45,WD puller, 185, 200, 7060 Red Belly, 7060 Black Belly,8010, and a R52 Gleaner, AND PROUD OF THEM!

Posted By: Ray54
Date Posted: 03 Dec 2013 at 9:50am

What can I say that good California eduction, a collage degree and cannot read .The basics are the same don't scare the kid running the computer at the hydraulic shop that the machine is twice as old as he is.Good hunting.
Ray

Posted By: Ages Cat
Date Posted: 03 Dec 2013 at 12:23pm

Check the mast and cylinders for a part number stamped on the mast and the lift cylinder. There must have been a dealer for AC trucks in your area. I have an ACP 25 which Herc U Lift in Maple Plain, MN supplied seal kits for. if you have the part number of the mast cylinders, they may be able to provide seal kits. They sell over the phone and ship parts out of their facility. A very large and well run organization. They have stores in several of the upper midwest states.