What is this?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=8089
Printed Date: 18 Jan 2025 at 6:27pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: What is this?
Posted By: KurtDE
Subject: What is this?
Date Posted: 14 Feb 2010 at 1:02pm
After splitting the 170 at the bellhousing and removing the clutch this fell out from behind the flywhee[I
|
Replies:
Posted By: Gary in da UP
Date Posted: 14 Feb 2010 at 1:15pm
| It is the plug at the rear of the block, covers the end of the camshaft . |
Posted By: KurtDE
Date Posted: 14 Feb 2010 at 1:24pm
| It is the plug at the rear of the block, covers the end of the camshaft . |
Posted By: Jack(Ky)
Date Posted: 14 Feb 2010 at 1:33pm
| I would have the flywheel checked while I had it out. It should be 1.437" from the surface that the pressure plate sets on down to the surface that the clutch plates sets on,JP |
Posted By: j.w.freck
Date Posted: 14 Feb 2010 at 2:50pm
| that appears to be a part left over.if the plug was missing very long you would have had a gusher of oil out the bell with engine running.. |