Farm Equipment - wd-45 nf adjustment

Print Page | Close Window

wd-45 nf adjustment

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=8058
Printed Date: 18 Jan 2025 at 1:29pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: wd-45 nf adjustment

Posted By: BLee Mn
Subject: wd-45 nf adjustment
Date Posted: 13 Feb 2010 at 7:59pm

started working on wd-45D today, has a standard NF, there is quite a bit of play insteering wheel, before wheels move, is this adjusted by shimming out the shaft that the worm gear is attached to ??

-------------
Cowboy UP

Replies:

Posted By: Gary in da UP
Date Posted: 13 Feb 2010 at 8:12pm

You may be able to remove some shims from behind the bearing retainer, but the most play is prolly in the u joint.

Posted By: BLee Mn
Date Posted: 13 Feb 2010 at 8:22pm

no , its in the gears

-------------
Cowboy UP