WD45 Parts
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=8047
Printed Date: 30 Oct 2025 at 10:51pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WD45 Parts
Posted By: fixer1958
Subject: WD45 Parts
Date Posted: 13 Feb 2010 at 3:59pm
|
Looking for a double belt crank pulley and a torque generator. Wanting to put power steering on this old orange. I can find new but really wasn't wanting to fork out the new prices and haven't been able to find used. I am capable of rebuilding the torque generator if it is rebuildable and the numbers are still visible.
Any sources/advice?
Can't afford to buy a newer tractor, but I can get this one the way I want it.
It's an old friend and I couldn't part with it anyway.
|
Replies:
Posted By: clovis
Date Posted: 14 Feb 2010 at 10:10pm
| I'm surprised there haven't been any responses yet, so here is a bump to the first page. |
Posted By: dannyraddatz
Date Posted: 15 Feb 2010 at 5:01am
|
You asked about a pulley did you call Doc or tony and barb from the site? There very help full in the needs of AC tractor restoration. Here is a link for you maybe looking for. Danny http://www.steinertractor.com/ACS069-crankshaft-pulley - http://www.steinertractor.com/ACS069-crankshaft-pulley ------------- Danny Raddatz |
Posted By: Don(MO)
Date Posted: 15 Feb 2010 at 6:16am
|
As Danny said you can get the pulley from the guys that sale on this site. If you are looking for a complete units used they will cost $500. to 900. They are not cheap to find and get all the parts to install then too or that will be just like hunting for the unit all over again. The units are out there just hard to find sometimes.
Don ------------- 3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep. |
Posted By: dannyraddatz
Date Posted: 15 Feb 2010 at 6:37am
|
Don has told me before, remove these units from the tractor to make sure all parts and linkage are with them. Take a lot of pictures too! It always seams so different once it's in the box on the way home. LOL Lots of head scratch! Danny ------------- Danny Raddatz |
Posted By: fixer1958
Date Posted: 15 Feb 2010 at 8:40pm
I have bought a few parts from Steiners and they have all I need and easy to deal with, but I was trying the used route first to save on cost if it's possible.
I know the cost will be high, labor is a given non issue.
Less is better so it doesn't tap into my beer money too much.
I don't know Tony, Doc or Barb you are refering too.
|
dannyraddatz wrote:Posted By: Don(MO)
Date Posted: 15 Feb 2010 at 8:55pm
|
Sorry Bruce,
I forget about the new Allis fan getting on here sometimes. OK at the top of this page on the right side you will see a box marked [Parts Etc.] go in there and you will find the parts guys we are talking about.
And just a FYI you might send Dennis AKA "den/southern illnoi" a Private Message he did have a power steering setup for a WD/WD45 for sale.
Don ------------- 3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep. |