Pulling Forum - '42 C steering

Print Page | Close Window

'42 C steering

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=79550
Printed Date: 22 Nov 2024 at 11:19pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: '42 C steering

Posted By: ACJohn
Subject: '42 C steering
Date Posted: 01 Nov 2013 at 7:39pm

Can one of the experts tell me if an early C with short steering arms used a smaller spline on the string box shaft? I'm trying to get the correct steering back and replace the cob-job that was on it. The spline pitch looks the same but my steering arm has been welded and won't fit on the steering box. It's just a little too small. I'm trying to figure out where the problem is. Thanks!

Replies:

Posted By: Dick L
Date Posted: 05 Nov 2013 at 2:48pm

My short arm steering box on a C was Ross and my long arm steering box on a C is a Gemmer. the steering arms will not interchange. Not sure if there was a difference in the long or short arms if they were both Ross but think they would be interchangeable. (Think) is a guess on my part.