Construction and other equipment

Print Page | Close Window

carb for wd engine

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=78984
Printed Date: 15 Nov 2024 at 7:06pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: carb for wd engine

Posted By: old diesel
Subject: carb for wd engine
Date Posted: 21 Oct 2013 at 6:53pm

I have enjoyed antique tractors for many years, just acquired my first ac (wc speed patrol) with a (wd engine 1948) and I will have many questions along the way. for this time my problem is -- air cleaner to carb outlet is 1 7/8 the carb tsx804 has 1 1/2 neck to air cleaner. is the carb wrong or what?

Replies:

Posted By: Steve in NJ
Date Posted: 23 Oct 2013 at 11:46am

A TSX804 doesn't sound like it was used on a Allis. I'm not at the shop to varify that, but it doesn't sound like somethin' used on an AC machine. It definately wasn't on a Speed Patrol. Most early WD engines were equipped with the 9707, 9707B, 9707C Zenith carbs which also showed up on the WC/WF 201 engines. On occasions they came with a TSX305 or 471 small bore Marvels. When I get into the shop late this afternoon, I'll do a little research for ya...

mailto:Steve@B&B" rel="nofollow - Steve@B&B

-------------
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife