Garden Tractors - Some part sizes

Print Page | Close Window

Some part sizes

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=78779
Printed Date: 04 Nov 2025 at 5:20am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Some part sizes

Posted By: Dr.Fiero
Subject: Some part sizes
Date Posted: 17 Oct 2013 at 6:35pm

Hi all. Still working away on the '66 Big Ten of course.

Since so many things are NLA, I've got to fabricate them.

Not a huge deal when I have a broken part, but when the part is out and out missing it's a bit of a guessing game! With all the parts books, at least the general shapes are now available.

But - it's the SIZE of some of them that's hard to guess at. For everyone's benefit, it might be nice to have a thread here (like... this one!) with some Q&A's on them.

Such as mine to start the ball rolling:

I have the dozer blade with the springs. I'm missing the rod that goes up to the lift lever. It looks like it was 3/8" rod, but what was the overall length of it? Say center to center of the pins?

-------------
Current slow rides: '65 Big Ten, '79 JD 317

Replies:

Posted By: Gary
Date Posted: 18 Oct 2013 at 4:55am

Here is a link to SimpletrACtors website:

Adjustable lift rod for front blade:

Gary

http://www.simpletractors.com/do_it/adjustable_lift_rod.htm

Posted By: Dr.Fiero
Date Posted: 19 Oct 2013 at 4:40pm

Thanks - just looking for the actual length of a stock bit right now.

-------------
Current slow rides: '65 Big Ten, '79 JD 317