Pulling Forum - cluthces

Print Page | Close Window

cluthces

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=78424
Printed Date: 24 Nov 2024 at 4:49am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: cluthces

Posted By: blue924.9
Subject: cluthces
Date Posted: 10 Oct 2013 at 8:47am

looking at parts dealers it says that a wd clutch is 10 inch in diameter with a 1 1/4 inch hub and 10 splines, if i found a clutch with those specs from say jegs or summitracing it would work right?

Replies:

Posted By: blue924.9
Date Posted: 10 Oct 2013 at 10:19am

ok, got in over my head lookin at clutches, whats the difference between spring, solid, and button clutches and which one works best

Posted By: XT in pa
Date Posted: 10 Oct 2013 at 12:53pm

Button or 4 pad is the way to go. Less surface area but more surface pressure.

-------------
190XT,D17and 7045

Posted By: Coke-in-MN
Date Posted: 10 Oct 2013 at 1:35pm

Spring center absorbs some stress when clutch engages, stops the shock load from transmitting . Solid center allows this shock but is less forgiving on any alignment problems as hub and disc are riveted to form one piece.

Button clutch has a higher friction coefficient and is either engaged or disengaged and allows little or no slippage .

I use them in my tractors, crawlers, heavy trucks, but one has to be careful also as they will wear pressure plate and flywheel faster if slipped that a fabric clutch will. When installing the flywheel should be refaced to clean ground surface first and same with clutch cover.

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."