D17 with 301
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=77219
Printed Date: 27 Nov 2024 at 8:14pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D17 with 301
Posted By: Charlie175
Subject: D17 with 301
Date Posted: 19 Sep 2013 at 9:35am
|
MattB sent me these pictures of his D17 with a 301 in it. Looks great! Matt, tell us about the conversion and what you had to do. http://smg.photobucket.com/user/RangerCharlie/media/06031320541_zps27316ed0.jpg.html" rel="nofollow">  http://smg.photobucket.com/user/RangerCharlie/media/Allis/0529131926a1_zps9c4968e5.jpg.html" rel="nofollow">  ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Replies:
Posted By: mattb
Date Posted: 19 Sep 2013 at 9:43am
| I cut a hole in the front bolster so crankpulley had room then put a hyd cylinder on front axle to push pull drag link for powersteering the back of the engine is all from a 180 which bolted right up. Had to grind a little out of the bellhousing |
Posted By: Charlie175
Date Posted: 19 Sep 2013 at 9:58am
|
That is just cool. So I assume you are getting 70 or so HP out of it? How does it pull? I always thought of putting a 200 ci from a 6000 series in a 17 or 19. ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Posted By: Glockhead SWMI
Date Posted: 19 Sep 2013 at 12:30pm
| Tight fit. Looks good. |
Posted By: JC-WI
Date Posted: 19 Sep 2013 at 10:00pm
|
Like that injection pump...more pics please... sure think thats neat. ------------- He who says there is no evil has already deceived himself The truth is the truth, sugar coated or not. Trawler II says, "Remember that." |
Posted By: Jamez99
Date Posted: 20 Sep 2013 at 2:32am
|
Thanks
you for updating us with this interesting
information. you did very great job. keep it up
http://www.units.it/ http://www.free-braindumps.net/201-01-pdf.html http://www.eccouncil.org/ http://www.ucla.edu/ http://en.wikipedia.org/wiki/EC-Council https://www.facebook.com/ECCouncil http://www.youtube.com/user/Apple ------------- http://www.free-braindumps.net/201-01-pdf.html http://www.eccouncil.org/ |
Posted By: mattb
Date Posted: 20 Sep 2013 at 7:15am
| ive been pulling this tractor for about 5 years if u look close you can see the blocks purple that's a big al engine in there its susposed to have came out of an army truck |
Posted By: XT in pa
Date Posted: 20 Sep 2013 at 11:04am
|
That's real nice. Any videos of it pulling ? Shawn ------------- 190XT,D17and 7045 |
Posted By: JC-WI
Date Posted: 20 Sep 2013 at 1:49pm
|
One of them purple people eater engines? ------------- He who says there is no evil has already deceived himself The truth is the truth, sugar coated or not. Trawler II says, "Remember that." |
Posted By: WildBill
Date Posted: 20 Sep 2013 at 3:06pm
|
I SURE WOULD LIKE TO SEE MORE PICTURES OF THIS ANIMAL ! I THINK ITS COOL ! THERE IS LOTS OF RESERVE HORSEPOWER FOR A 301 ! I SEE IT HAS A SIMMS PUMP ON IT . THAT WAS A REAL EARLY 301 ... DOES IT HAVE THE PLATES AT EACH END OF THE CYLINDER HEAD ? YOU COULD PUT A TRICK 11MM A -PUMP ON IT AND SOME NICE INJECTORS THIS WOULD BE A NICE SLEEPER. I SUPPOSE THE CLASS WILL NOT ALLOW TURBO'S ? LOT OF POTENTIAL UNTIL THE DRIVELINE OR CLUTCH GIVES OUT.
IF YA CAN SOMEONE WAS ASKING FOR A VIDEO THAT BE REALLY NICE TO SEE ------------- Allis fan for life ! B,C,2-WC'S,WD45G,D19G,190xt ,LLSS 8010, terra tiger refurbished |
Posted By: tbran
Date Posted: 21 Sep 2013 at 9:33am
|
Probably a hybrid gen set eng. the LH fuel pump block off has hole pipe plug and block off for RH oil cooler is different color. Most of those were freeze plugs on early 2800's. A natural asp 2800 with a Simms - I have never seen - but then they made a bunch of special apps for special orders. IF it has the bubble in the front of the oil pan then is was not an early eng. Fun trivial stuff
|
Posted By: DarrylinWA
Date Posted: 21 Sep 2013 at 11:19am
|
Brad TeVelde has one in in D 17 puller narrow front. Pulls 5000 lbs and about 10 plus mph. Work of art this thing is!!! Neat stuff  Darryl------------- B 10 Custom. Serial # 1001 D21, First D21 built 69 #4498 and Last D 21 Built #4609. 1946 MM UTU. And 2000, 2005 Pete's. AC custom Hauling. |
Posted By: mattb
Date Posted: 21 Sep 2013 at 2:28pm
| Engine was originally turbocharged. Had oil cooler also. |
Posted By: mattb
Date Posted: 21 Sep 2013 at 2:31pm
| Plate on the left front side of the block youcan see in the picture says it was specked for a mack truck. |
Posted By: tbran
Date Posted: 21 Sep 2013 at 10:28pm
| What MACK truck had a 120 Hp engine? |
Posted By: DougG
Date Posted: 21 Sep 2013 at 11:48pm
| Thats what i was wondering!! Id hate to drive that thing ! I couldnt imagine any truck other than a pickup having a 301 in it |
Posted By: blue924.9
Date Posted: 23 Sep 2013 at 8:00am
| lotta old trucks had big al motors in em, |
Posted By: Glockhead SWMI
Date Posted: 23 Sep 2013 at 9:50am
| There was a bunch of info on the Big Al engines in the construction section recently. |
Posted By: tbran
Date Posted: 23 Sep 2013 at 10:32pm
| Big Al was 844 cubic inches - a 25000 series. |
Posted By: DougG
Date Posted: 24 Sep 2013 at 1:25am
| There were 5 different versions of them,from 301-844 ci but the true Big Al was a 25000 series 844 ci |