Farm Equipment - 410 shuttle shift parts

Print Page | Close Window

410 shuttle shift parts

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=7654
Printed Date: 19 Jan 2025 at 12:28am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 410 shuttle shift parts

Posted By: Mark W
Subject: 410 shuttle shift parts
Date Posted: 05 Feb 2010 at 8:54am

Hello,

Thank you in advance for any help. I am searching for parts for an old Allis-Chalmers 410 garden tractor. I believe it is 1971. She has been around and in the family for quite awhile. It seems like they do not make them like they used to. This is a shuttle-shift type of drive. It has a belt and brake band mechanism to go from forward to reverse. The transmission is 4-speed, no reverse. What I am looking for is part of the rear differential. (An axle tube assembly I’m told). I did have a chance to look at a part list for this, but it looks rather complicated to replace just that part. Maybe there is one of these around that I could get the whole differential from or the rest of unit if I had to. Any help or push in the right direction would be great.

Thank you again.

Mark Wiegert

Replies:

Posted By: tadams(OH)
Date Posted: 05 Feb 2010 at 2:45pm

Try at http://www.simpletractors.com - www.simpletractors.com

Posted By: Chris/CT
Date Posted: 05 Feb 2010 at 4:49pm

I think I have a rear-end assy that would work for you. It is heavy to ship, costly I'm sure. E-mail me if interested.

Posted By: Mark W
Date Posted: 05 Feb 2010 at 5:56pm

Thanks for responding. I'm sure it's heavy, but I'm definitely interested. Where abouts do you need to ship from and how much do you want.

Posted By: Cal
Date Posted: 05 Feb 2010 at 10:50pm

Mark The axle tube is not that hard to replace once you remove the transmission from the tractor. If you get a good diagram of the parts breakdown. Where are you located, we could change it for you here at Yankee Sales & Service, we just changed an axle tube in a B 110 for a customer. We have been in business 0ver35 yrs. So we know those tractors, the problem with a used unit is that metal fatigue could happen on that unit soon after installing. The 400 shuttles were from the1974 era the first 300s were 71-72 second version 300s 73, 400s74, then for75 the 700s started. Cal inCt.

Posted By: Mark W
Date Posted: 16 Feb 2010 at 8:57pm

thanks for the response-sorry for my delay. I am located in Illinois. Do you have this assembly available for sale? Since I have had this tractor for several years, I think I might be able to figure it out. Please let me know if you have the part ( or where I could get it) and the cost. Thanks for your help!

Posted By: norm [ind]
Date Posted: 18 Feb 2010 at 8:44pm

we have your seal[rubber band] an spacer you needed 1-800-254-3116