Print Page | Close Window

TVPPA Tractor pull starts today!

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=76439
Printed Date: 29 Jun 2024 at 2:52am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: TVPPA Tractor pull starts today!
Posted By: cotncrzy
Subject: TVPPA Tractor pull starts today!
Date Posted: 06 Sep 2013 at 7:43am
  Hey guys, there is a pull in Eagleville,TN starting tonight and goes through Sunday. This is the real thing! All tractors, no crappy track that they use tractors to build it up for the trucks. http://www.eaglevilletvppa.com/" rel="nofollow - http://www.eaglevilletvppa.com/  If you are serious about pulling antique tractors, and want to travel to middle Tennessee to pull I suggest you to be loading up. We will be there Friday night, at the last minute (getting of combine and into the truck), and hopefully Saturday by lunch. Not going to be able to play Sunday, back to the corn field!

-------------
C, WD45,WD puller, 185, 200, 7060 Red Belly, 7060 Black Belly,8010, and a R52 Gleaner, AND PROUD OF THEM!



Replies:
Posted By: wi50
Date Posted: 07 Sep 2013 at 10:46am
It's boreing here so maybe I should start a fight.  Make sure to post some pictures, videos and results from the boys in east TN so we can see them in action.  I'm sure they won't be hard to miss.
 
On a serious note, good luck.


-------------
"see what happens when you have no practical experience doing something...... you end up playing with calculators and looking stupid on the internet"


Posted By: Ihateillinoisnazis
Date Posted: 07 Sep 2013 at 1:17pm
Agreed with Wi. Those TVA clowns need some video lessons on what tractor pulling is about..    Full pulls to y'all!


Posted By: mgburchard
Date Posted: 07 Sep 2013 at 3:12pm
Tva clowns are over at MLs  honing sleeves on the 440 cubic inch g226.  going threw a set of hard sleeve hones in about a hour to get .008 . lol


Posted By: Ihateillinoisnazis
Date Posted: 07 Sep 2013 at 9:23pm
Originally posted by mgburchard mgburchard wrote:

Tva clowns are over at MLs  honing sleeves on the 440 cubic inch g226.  going threw a set of hard sleeve hones in about a hour to get .008 . lol



Blahhh. Where's the Gleason?


Posted By: bradley6874
Date Posted: 08 Sep 2013 at 6:41am
Stop dont start it again

-------------
You can wash the dirt off the body but you can’t wash the farmer out of the heart and soul


Posted By: cotncrzy
Date Posted: 08 Sep 2013 at 9:39am
  Hey guys, after two days of hard pulling we hooked 6 times, got two 1st's, three 2nd's, and one 3rd. Not to awful bad considering the competition. We still seeking more though, actually we may have found it, just got to get it. Pics on Facebook, http://www.facebook.com/pages/Totally-Ballistic-Pulling-Team/460892110637587#!/pages/Totally-Ballistic-Pulling-Team/460892110637587" rel="nofollow - http://www.facebook.com/pages/Totally-Ballistic-Pulling-Team/460892110637587#!/pages/Totally-Ballistic-Pulling-Team/460892110637587 .

-------------
C, WD45,WD puller, 185, 200, 7060 Red Belly, 7060 Black Belly,8010, and a R52 Gleaner, AND PROUD OF THEM!


Posted By: jpankey
Date Posted: 08 Sep 2013 at 12:05pm
did ole willie makit blow? That old tractor did belong to the mcdaniels from around tanner Alabama have they still got it . hudsons 6 cylinder runs as good if not better . willie makit has been beaten by a large cube g226 before.


Posted By: cotncrzy
Date Posted: 08 Sep 2013 at 9:25pm
  Yea they still own it. They live in Cloverdale, AL a few miles north of Florence. They said it blew a head gasket, they had pulled it several times and it was hot. It's a good running tractor but is a hand full on a shakey track. They are pulling a LL superstock now, we don't see much of them on the antique circuit anymore. We will be pulling in their backyard over around South Gate, TN the 21st. They might get to come up and pull, they good competition and good folks.

-------------
C, WD45,WD puller, 185, 200, 7060 Red Belly, 7060 Black Belly,8010, and a R52 Gleaner, AND PROUD OF THEM!


Posted By: jpankey
Date Posted: 09 Sep 2013 at 8:19am
Jason ans Jeromy are tva clowns to. Brownsferry



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net