Construction and other equipment - HD11E Rollers Needed

Print Page | Close Window

HD11E Rollers Needed

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=76021
Printed Date: 28 Jun 2025 at 10:38pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: HD11E Rollers Needed

Posted By: Gargoyle
Subject: HD11E Rollers Needed
Date Posted: 29 Aug 2013 at 7:47pm

I need 3 rollers for an Allis HD11E. Please email with info.

Replies:

Posted By: gemdozer
Date Posted: 30 Aug 2013 at 6:08am

I have some HD11 E rollers and am located near MONTREAL CANADA and you have to pick up

Posted By: Gargoyle
Date Posted: 30 Aug 2013 at 10:23am

I'm in Missouri, so that's quite a drive. I'll have to keep looking.

Posted By: Gargoyle
Date Posted: 30 Aug 2013 at 10:26am

Would you consider shipping?

Posted By: gemdozer
Date Posted: 30 Aug 2013 at 11:23am

I did't check the shipping price for the rollers but should $145.00 each just for shipping and you should be able to find some near your place.

Posted By: Gargoyle
Date Posted: 30 Aug 2013 at 11:53am

Let's hope so. So far I am striking out.

Posted By: Lazyts
Date Posted: 30 Aug 2013 at 1:21pm

Is your serial number above or below 10000?

Posted By: Gargoyle
Date Posted: 30 Aug 2013 at 1:25pm

Serial #8878

Posted By: Lazyts
Date Posted: 30 Aug 2013 at 3:47pm

PM me- I know where there are some. (NE Missouri)

Posted By: DMiller
Date Posted: 30 Aug 2013 at 4:32pm

By my 7G catalog the roller change seems to be the center design not a general size change so the rollers from a early or late should work so long as you replace the assembly as a whole.

The conversions could be just upgrades, see minnpar catalog page 415(old page 411) for the 11E and for my 7G unit page 249(old page 230) the part numbers are same for mine to the severe duty p/n for the 11E:

Roller 70069546, is part of assembly 70629338. Drop the 70 prefix for the older Allis P/N. My tractor doesn't have any double flange rollers.