allis swing cylinder
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=75541
Printed Date: 28 Jun 2025 at 5:37pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: allis swing cylinder
Posted By: kansasbikerider
Subject: allis swing cylinder
Date Posted: 21 Aug 2013 at 2:43pm
| needing a swing cylinder for a allis chalmers 816 b series 2 backhoe..called and checked every where a I can with no help.. anyone got one they wanna sell.. I can buy all the parts for a complete one but cost is way out there...understand there may be a case swing cylinder that may be the same specs,, I think its a case 580c but not sure..any help would be great thx Kelley 785 531 1141 or kansasbikerider@hometelco.net |
Replies:
Posted By: agent008188
Date Posted: 21 Aug 2013 at 6:28pm
| I can rebuild your cylinder and help with parts. give me a ring 785-633-4377 |
Posted By: Coke-in-MN
Date Posted: 21 Aug 2013 at 6:58pm
|
Is it two cylinders mounted under hoe or is it a rotary piston like on the 615 hoe ? MINNPAR should have the repair parts or if cylinders a hyd shop should be able to obtain generic parts for most repairs . IF they are missing - well good luck in trying to find original replacements ------------- Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something. "Challenges are what make life interesting; overcoming them is what makes life meaningful." |
Posted By: doctorcorey
Date Posted: 21 Aug 2013 at 7:11pm
| I use KwikParts in Williamsson(burg) Missouri. They service Allis and Case, and get your stuff to you fast. They last got me the lift cyl packing for my 420 Backhoe, genuine CIH parts. |
Posted By: doctorcorey
Date Posted: 22 Aug 2013 at 10:37am
| I think yesterday I saw a case 580 swing cyl on the web. Walt's Tractors, I think. |
Posted By: kansasbikerider
Date Posted: 22 Aug 2013 at 6:18pm
| min par didn't have any thing but looking at all my options will try some of the places u all have posted thx for the help so far it all helps |
Posted By: kansasbikerider
Date Posted: 22 Aug 2013 at 6:19pm
| it is 2 cylinders the turion type |
Posted By: CAL(KS)
Date Posted: 22 Aug 2013 at 8:09pm
|
Dont know where in KS you are but i would try Ginder Hydraulic Salina KS can repair pretty much any hydraulic cylinder, they also fabricate cylinders for custom needs http://www.ginderhydraulic.com/" rel="nofollow - http://www.ginderhydraulic.com/ ------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20 Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15 |
Posted By: doctorcorey
Date Posted: 22 Aug 2013 at 9:41pm
Sorry, that should have been Maine Tractor. Case part no. D36878. "580 swing cylinder" at 300$ Did you ever mention just what is wrong with your cylinder? Or is it missing?
|
Posted By: kansasbikerider
Date Posted: 22 Aug 2013 at 10:54pm
| m y left hand cylinder was bent in the shaft and the last 3 - 4 inches is the vavle plate and spring called the cushioner and it broke there and ruined the whole cylinder |
Posted By: kansasbikerider
Date Posted: 22 Aug 2013 at 10:56pm
| im only about 50 mile from ginder hydraulics thought about hoff machine in salina when I get the chance im taking both cylinders and let them take a look being one is still good |