The pulling forum
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=74409
Printed Date: 18 Apr 2024 at 5:21pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: The pulling forum
Posted By: Moderator
Subject: The pulling forum
Date Posted: 01 Aug 2013 at 8:16am
|
The forum was shut down for 24 hours because of the actions of several forum members. In some respects, this was a selfish act on my part. To put it simply I was tired of babysitting and needed a 24 hour break. So here's a proposition for the members; Play nice or play somewhere else. I will not spend enormous amount of time separating fights. From this point on, if you are interjecting into a thread merely for the purpose of spite, you are gone. If it appears your sole purpose in posting is to continue or escalate the fight, you are gone. It is perfectly acceptable to point out that someone is completely wrong in their engineering or methods. In fact, it SHOULD be what makes this section valuable. I will not ban members based on the level of their expertise. But if I deem your post to be a personal attack I will no longer waste my time. Yes, that means it is completely a judgment call on my part. I have been a moderator for Darin for many years, and am quite comfortable that he is confident with my decisions. I'm actually very disappointed that in less that 24 hrs after the forum being re-opened we returned to the childish bickering and attacks. ------------- ============================================================ The moderator at any given time may be the forum owner, or a trusted assistant. Your cooperation is appreciated. Thank You |
Replies:
Posted By: SF 49ers Fan
Date Posted: 06 Aug 2013 at 7:54am
Good try, what's next???
XXXOOO's
 |
Moderator wrote:Posted By: THE-MAN
Date Posted: 06 Aug 2013 at 8:36am
| *post edited* objection deleted. Have a nice day. |
Posted By: AC200Puller
Date Posted: 10 Oct 2013 at 5:33pm
| Thank you! I hope all bring in useful information and help each other out as we all want to see the orange tractors do well. |
Posted By: Ken in Texas
Date Posted: 15 Dec 2014 at 6:26am
| For the nasty actions of a few we just shut the whole thing down? Why not name names and delete their posts |
Posted By: Charlie175
Date Posted: 15 Dec 2014 at 6:58am
|
This was a year ago! ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Posted By: AC puller
Date Posted: 24 Oct 2015 at 10:48am
| Can someone give me advise on building a wd45 engine? Not sure on how or what parts to use for bigger high comp pistons. |
Posted By: Kurtz D-21
Date Posted: 06 Dec 2015 at 4:40pm
| my nephew put 4020 pistons in a w-c and i don't know how much more was but i do remember in the 6500 he droped the throttle half way down the track and he grab it and it was like notting happen - so just how far do you want to go with a stock block? |
Posted By: Gary Robinson
Date Posted: 23 Oct 2021 at 6:28pm
| We just signed up for this site a couple hours ago. We know nothing about how it works, but I have put together info on a tractor and pulling service rig for my husband but don't know how or where to start a new thread. Can anyone help me? Gary is looking for an allis chalmers WC with a Cooper pulling rig mounted on it. If you have one or know of anyone that does, could you please email us at bonarobinson@gmail.com It is for an oil well. Thank you. |
Posted By: mdm1
Date Posted: 27 Oct 2021 at 3:58pm
|
Hey welcome to the forum. PM sent. ------------- Everything is impossible until someone does it! WD45-trip loader 1947 c w/woods belly mower, 1939 B, #3 sickle mower 1944 B, 2 1948 G's. Misc other equipment that my wife calls JUNK! |