ih100# weight placement
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=73881
Printed Date: 27 Nov 2024 at 12:12pm Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: ih100# weight placement
Posted By: firephight
Subject: ih100# weight placement
Date Posted: 22 Jul 2013 at 9:01am
Our pull is tonight and it rained yesterday looking to see what a good setup for the 4000# 4500# 5000# .should I weight it heavy on the front or move them to the middle?
|
Replies:
Posted By: Gary in da UP
Date Posted: 22 Jul 2013 at 9:39am
Watch those who pull before you. No one here has a crystal ball to know track conditions or your tractor.
|
Posted By: blue924.9
Date Posted: 25 Jul 2013 at 9:32am
so how did you do? how was the track, in general the more grip the track has the more weight you want on the front to keep the front end down. the slicker the track the more weight on the back, usually for the 3500 pound class i throw a weight on the front and maybe one on the back and fill the rest of the remaining weight in on the middle brackets just in front of the axle as this gives you a little weight in front and in back
|
Posted By: blue924.9
Date Posted: 25 Jul 2013 at 9:33am
i should also mention that an optimal pull has your front end bobbing up in down, when it does that you can steer when it is on the ground, yet you know you have good enough traction to pull the front end up
|
Posted By: firephight
Date Posted: 27 Jul 2013 at 4:22pm
I got 5 in the 4000# and 4 in the 4500# class 4500 class I ran 2 100# weights out front and 2 under the rear axle the rest was on the side brackets.front end stayed down and dug some deep holes
|
Posted By: blue924.9
Date Posted: 29 Jul 2013 at 1:19pm
congrats, dont let pank try to fill you with the nonsense that anything below first is a loss
|
Posted By: mlpankey
Date Posted: 29 Jul 2013 at 9:02pm
Even the village idiot knows to look at the length of chain hooked to the sled . longer the chain typicaly more weight is needed on rear of tractor , Shorter chain needs more on front of tractor. the holes you dig also tells alot about whither the tires are over or under inflated. the rest is knowing your tractor and track condition lol
------------- people if they don't already know it you can't tell them. quote yogi berra
|
|