Pulling Forum - pulling a 7000 series allis

Print Page | Close Window

pulling a 7000 series allis

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=73814
Printed Date: 11 May 2024 at 8:57am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: pulling a 7000 series allis

Posted By: timmypuller
Subject: pulling a 7000 series allis
Date Posted: 21 Jul 2013 at 4:40am

can you take a d21 210 or 220's transmissions and put in a 7000 series allis? don't know a lot about this series but only 1 that pulls in this area sounds like hell because howls so bad. i think its the power director trans making all the noise. found 7040 cheap brother thinking of buying and building into puller . power director trans is bad and we would rather just set it up like my d21 if possible

Replies:

Posted By: DougG
Date Posted: 21 Jul 2013 at 5:06am

Dont think that will work, 7000 series are totally different than 21,s,210+220 ;those things are so heavy to begin with, alot of stripping needs to happen; gutting the PD and run a straight thru shaft can be done to by pass that problem

Posted By: DrAllis
Date Posted: 21 Jul 2013 at 8:27am

There is not one single part interchangebale in the driveline between a 7000 series and a D21. The 7000 series driveline does not normally "howl", so there may be some custom made gears in it. It also could be a D21 chassis with 7000 series hoods.