WC Questions for the experts
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=7353
Printed Date: 17 Jan 2025 at 2:39pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WC Questions for the experts
Posted By: Gary in da UP
Subject: WC Questions for the experts
Date Posted: 29 Jan 2010 at 2:54pm
My next project has been drug in and I'm cleaning up and Inspecting . I started at the front and after cleaning the inside of the support found the stop is broken both in the support and chipped away from the under side of the gear, allowing the worm to screw itslf right off the gear. I assumed the easiest way to dissassemble would be to drop the spindle block, I 've removed the bottom bolt and set screw, It don't wanna drop off , What's the trick? Heat and a BFH ? I assume that once the spindle block is off I can pull the shaft and gear thru the top of the support? I'd like to replace the seals ,too while I'm in there. Also the spindle block has a scraper? built in , I have never seen one like this , is it uncommon ? Thanks , Gary
 , |
Replies:
Posted By: JoeM(GA)
Date Posted: 29 Jan 2010 at 7:29pm
Gary, shouldn't be anything else but crud and the key holding it up   ------------- Allis Express North Georgia 41 WC,48 UC Cane,7-G's, Ford 345C TLB |