posting pics-need help again!
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=7322
Printed Date: 17 Jan 2025 at 5:28pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: posting pics-need help again!
Posted By: Tracy Martin TN
Subject: posting pics-need help again!
Date Posted: 28 Jan 2010 at 8:32pm
| I can't get the hang of posting pics. I can get them to photobucket, and to here. I can't get a direct pic to post without going to photo bucket. What am I doing wrong? Thanks Tracy Martin |
Replies:
Posted By: omahagreg
Date Posted: 28 Jan 2010 at 8:54pm
|
My pictures are too big to go direct. I have my cameras taking the lowest megapixel pictures, and still too big. I found a resizing website, and have tried it that way, but find it easier to just use Photobucket. ------------- Greg Kroeker 1950 WD with wide front and Freeman trip loader |
Posted By: Dnoym N. S. Can.
Date Posted: 28 Jan 2010 at 8:54pm
|
Tracy Martin TN
this is what i do, give it a try in the top
header of the Quick reply in this
post you will see abc that for
spellcheck if you go over to the
one with an (up-side arrow ) and
click on that it will bring you to a
full reply : posting . in the top
header on that you will see a
picture of a green tree if you click
on that picture it will bring you
to the
Image Propertiesthere you will see Image Upload
all picture that you have on your computor
can be uploaded here like you do on
photobucket
you can set the size that you want
600 x 800
hope this help if not just ask
B:-) Dnoym |
Posted By: Dave(inMA)
Date Posted: 28 Jan 2010 at 9:09pm
|
Dnoym - you mention that "you can set the size that you want" - is that something you do on Image Upload page and, if so, where do you do that? Thanks. ------------- WC, CA, D14, WD45 |
Posted By: Dnoym N. S. Can.
Date Posted: 29 Jan 2010 at 9:37pm
|
Dave(inMA
http://www.allischalmers.com/new/forum/new_reply_form.asp?M=Q&PID=56638&PN=1&TR=4 - Quote
Dnoym - you mention that "you can set the size that you want" - is that something you do on Image Upload page and, if so, where do you do that? Thanks.
Dave i wouldn`t say "you can set the size that you want"
on window 98 and xp you do it on Image Upload page
and you can change it some too mutch and it distorts
but this is were i do it
it would be nice if the Moderator
 Moderator Group  would drop in and give us the run down like they say right out of the hourse mouth
hth B:-) Dnoym
|
Posted By: Ken in Texas
Date Posted: 30 Jan 2010 at 12:13am
|
I followed CTuckerNWILs detailed directions to post a picture direct from my computer. it involved clicking on a tree, getting a image properties window, click on browse, Find the picture you want to post, open it, click upload, click ok in the small window that tells me to be patient, wait , a fuzzy piece of my picture appears in a box lower right. Here is where you resize to get the picture to fit the box. Did that and posted a crappy fuzzy picture and went back to the photobucket way. See what fuzzy means by checking the B/C seat post. It probably will work if what you upload is pre sized before you upload to the post. When I uploaded the picture the size was 1600 wide and 1200 high
The instructions say not greater than 800 wide and 600 high which was still way to big. I think I went down to 400 and 300 to get a fit and lost all clarity.
|
Posted By: Bill_MN
Date Posted: 30 Jan 2010 at 1:30am
|
if you keep the same aspect ratio for the picture it should turn out fine. to figure this out take the starting width of your picture divided by the height. now take that number times the new height you want and the new width should be what you get. as long as the new width and height are smaller than 800 and 600 respectively you should be fine. now that i've made it even more confusing.....i best just go to bed ------------- 1951 WD #78283, 1918 Case 28x50 Thresher #76738, Case Centennial B 2x16 Plow |
Posted By: Dave(inMA)
Date Posted: 30 Jan 2010 at 6:39am
|
Oughta be easy.....but it isn't, thus far! Would be a lot friendlier if the upload page automatically resized pictures to stay within a size that's easy for viewing (ie, no scrolling) and remained in proportion. ------------- WC, CA, D14, WD45 |
Posted By: Thad in AR.
Date Posted: 30 Jan 2010 at 6:58am
| Tracy I email the pics to my self that I want to post and then post them. My email shrinks them to send them faster and they fit the forum. I don't use photobucket anymore. |
Posted By: Jerry (Ohio)
Date Posted: 30 Jan 2010 at 7:00am
Just trying to post picture
|
Posted By: dannyraddatz
Date Posted: 30 Jan 2010 at 7:21am
|
Tracy, Step 1 open photo bucket. Step 2 select picture. Step 3 I resize to large or medium Step 4 Highlight and cut and paste the IMG Code line into this message (up to 3 different pictures) Step 4 Preview Post ( If you dont see it, it's not right try again) I hope this helps, Danny   ------------- Danny Raddatz |
Posted By: SteveM C/IL
Date Posted: 30 Jan 2010 at 10:07am
| Hey Danny! Any of the city neighbors ask to be cleaned out with the AC?Seems I remember them looking at you with raised eybrows when that tractor showed up in town. |
Posted By: SteveM C/IL
Date Posted: 30 Jan 2010 at 10:20am
HMMM!Did it work?
|
Posted By: Jeff(WD45-SATX-TN)
Date Posted: 30 Jan 2010 at 10:25am
One note guys, the picture size can not be anything random. You have to maintain the same proportions, height to width. All the instructions above are spot on, when you come to the image size window. I usually divide those numbers in half. Mine usually come in at 1280 X 960. I then resize to 640 X 480. Once in the reply window you can drag the edgs to size down furhter. Click on your image and the four corners and midpoints will light up. Just drag from the corners, and keep the height and width even. Visuals of above notation:
  Hope that helps.....
|
Posted By: SteveM C/IL
Date Posted: 30 Jan 2010 at 10:26am
Try without resizing.
 |
Posted By: dannyraddatz
Date Posted: 30 Jan 2010 at 2:34pm
|
Steve, Just got done with a farmers / tractors collectors breakfast, 15 of us gathered and are planning the summer season in downtown plainfield. we got a chance to shoot the bull and look back at last year. Ready to have a good time and screw up traffic on tuesday nights staring in june! The best was 2 weekends ago I brought home a friends Farmall 706 and parked in the drive way for 6 hours to work on an electical problem, the neighbor wouldn't even look at me! I only wish it would have beeen there for a week. Danny ------------- Danny Raddatz |