PTO pulley for CA
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=7289
Printed Date: 17 Jan 2025 at 2:34pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: PTO pulley for CA
Posted By: Larry in OK
Subject: PTO pulley for CA
Date Posted: 28 Jan 2010 at 9:45am
|
Can anyone post a picture of a PTO pully for a CA. The '51 CA I'm buying from my aunt is missing the pully.
I'm willing to bet it is still on the place and that I can find it but I'm not sure what I'm looking for. If possible a side and end view.
Thanks.
|
Replies:
Posted By: Andy in Central IA
Date Posted: 28 Jan 2010 at 10:05am
|
My 1951 CA does not have a belt pulley. It does have a PTO, but there is no shaft to put a belt pulley in. ------------- Andy Central IA |
Posted By: Dave Richards (WV)
Date Posted: 28 Jan 2010 at 10:13am
|
On ebay right now, good picture notice the seam at the half way point. Looks like sheet metal bolted to hub rather than a cast pulley. I would almost swear mine is aluminum but that doesn't sound right for the time. http://cgi.ebay.com/Allis-Chalmers-CA-Tractor-Original-Belt-Pulley_W0QQitemZ140377766791QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item20af2abb87  |
Posted By: Larry in OK
Date Posted: 28 Jan 2010 at 11:08am
|
Thanks, I didn't think to look on Ebay. Now that I have a pic I know which pile of "stuff" it is in.
There are a couple of flat pulleys like that in my uncles stuff and at least one for sure is aluminum.
If you're interested I'll gt a pic of the aluminum one and post it for you next time I go to the farm.
|
Posted By: alan-nj
Date Posted: 28 Jan 2010 at 11:22am
|
here's some more of an aluminum one i recently took off a 54 ca.
alan
  |
Posted By: Larry in OK
Date Posted: 28 Jan 2010 at 2:16pm
|
From those pictures it looks like my unccle had several pullys laying around that will fit the CA.
Thanks for the help guys.
|