Farm Equipment - d17 226 gas/170 226 gas points/ignition assembly ?

Print Page | Close Window

d17 226 gas/170 226 gas points/ignition assembly ?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=7048
Printed Date: 16 Jan 2025 at 5:48pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: d17 226 gas/170 226 gas points/ignition assembly ?

Posted By: boscoe
Subject: d17 226 gas/170 226 gas points/ignition assembly ?
Date Posted: 23 Jan 2010 at 2:18pm

I am replacing the engine in my 1959 D 17 with a 226 gas from a 170 AC, the problem is the points/ timing assembly is I think the same but the dowl pin doesnt line up on the 170 block with the assembly from the d 17 engine. I am just taking the parts off the d 17 226 and puting them on to the 170 226 . what should I do. Can I use just tap out the dowl pin and bolt it on or will that do damage to the timing gear, or do I need a different timing points assembly . If anyone would have some knowlede on this please let me know thanks.

Replies:

Posted By: boscoe
Date Posted: 23 Jan 2010 at 2:28pm

It is maybe more commonly known as the governor assembly, the points are mounted on to it hope this helps. thanks

Posted By: Kip-Utah
Date Posted: 23 Jan 2010 at 3:55pm

Why don't you want to use the governor assy that's on the 170?

-------------
HANSEN'S OLD ORANGE IRON. Showing, Pulling, & Going!!

Posted By: boscoe
Date Posted: 23 Jan 2010 at 7:04pm

I bought the block and head together as one unit but BARE everything had been stripped.