Print Page | Close Window

400 cubic inch 140 hp is this real !!

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=69765
Printed Date: 12 May 2024 at 3:21am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: 400 cubic inch 140 hp is this real !!
Posted By: firephight
Subject: 400 cubic inch 140 hp is this real !!
Date Posted: 04 May 2013 at 7:59pm
http://www.radiowebservices.com/posts/show/6ffbc2c4-8b0e-4ed0-b433-c3f13a394195






1951 Allis Chalmers WD Puller

Posted in Tractor of the Week at 12:00PM on 06/07/2010


Here is the first pulling tractor to be our Tractor of the Week here at KRVN.com. Thanks to Mark Hamel for the picuture of their puller.



This tractor was the 2009 NATPA Division IV National Champion in the 3500 lb Class and 2nd in the 3750 lb Class. It also made the cover of The Hook Magazine in 2006 with Mark's nephew, Justin Hamel at the wheel. The other picture is of his brother Jesse with the WD.



Mark's brother Kurt built the motor that turned it into a champion. He also builds motors for antique pullers all over the U.S. This tractor is a good example of his handiwork with the powerplant turning out over 140 h.p.! Mark says the motor started with 226 cubic inches at 50 h.p. and it now has 400 cubic inches. Wow, that is certainly quite a jump in power!



Thanks Mark and to the rest of your pulling team for the entry this week. The Hamel's also have another puller. We will feature the D-17 Allis at a later date so stay tuned!



For a closer look, click on the pictures below. Send your tractor to the addresses above!   


Photos



Replies:
Posted By: Breeze
Date Posted: 04 May 2013 at 8:20pm
heres the pics

http://www.radiowebservices.com/images/galleryimages/95213916-12cd-4f24-80c5-2f5ebd4e1c40.jpg
http://www.radiowebservices.com/images/galleryimages/21e102df-97cb-49eb-929b-0726612e669e.jpg


Posted By: THE-MAN
Date Posted: 04 May 2013 at 9:51pm
Hamels ran very well . I do remember his article I'n hook magazine where it made 160 or 140 honor something but it was on an ENGINE dyno..


Posted By: CTuckerNWIL
Date Posted: 04 May 2013 at 10:02pm
400 cubic inch 140 hp is this real !!
For anybody that has the time and the money,sure

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF


Posted By: Rod B
Date Posted: 04 May 2013 at 11:28pm
Oh are we going to make fun of our keyboard commando in this thread!

-------------
for the money there is nothing better than provoking idiots and posers


Posted By: THE-MAN
Date Posted: 05 May 2013 at 7:06am
Naaaaa. Another post where there's proof and pics... he won't stick around for long. Neat post tho... I haven't talked to Kurt In years. I wonder what ever happened to him. I'm pretty sure the bores were 4.60 with the short big chief pistons. I'll try to remember what else he told me.


Posted By: mlpankey
Date Posted: 05 May 2013 at 2:17pm
i talked several times with kurt  back in the days he used a 6 inch stroke 4 5/8 bore like tarbill did back in the day with shortened H rods. with a six inch stroke piston speed in feet per minute is the same as engine rpm.  If you talk to don and dan or brandan karpel you will find a 4.750 by 6.250 memebers on this site as well has been around just as long.    140 hp is easily got out of a 4.65 bore by 5.8 stroke like the dr. , barney or jt richardson ran years ago as well . D17 brown also runs around 430 inches . There was a full blown build of kurts in hook magazine back before the buy out as well. the reason most use a big chief bbc piston is its a off the shelve 4.625 bore. These are good articles of what you small cubic inch boys are possibly going to run up against if you pull outside your home town. a lot  of large inch motors have been sold or complete tractors since antiques hay day. look at the wheel speed the big inch motors getting . 

-------------
people if they don't already know it you can't tell them. quote yogi berra



Posted By: The Other Orange
Date Posted: 06 May 2013 at 3:53pm
Whats the cost in a 140hp allis enigine? Just wondering how much more $ it is compared to say a 140hp ollie 77/310 combo. 3x as much?


Posted By: mlpankey
Date Posted: 06 May 2013 at 4:06pm
Originally posted by The Other Orange The Other Orange wrote:

Whats the cost in a 140hp allis enigine? Just wondering how much more $ it is compared to say a 140hp ollie 77/310 combo. 3x as much?
8 grand of coarse the 200 hp 400 cubic inch crossflow  headed  oliver 77 tractor that i pulled against a lot and are good friends with two of its previous owners. the engine bill was 14 grand on. it was built in california   

-------------
people if they don't already know it you can't tell them. quote yogi berra




Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net