Farm Equipment - D17 Flywheel Depth

Print Page | Close Window

D17 Flywheel Depth

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=6931
Printed Date: 16 Jan 2025 at 1:40pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D17 Flywheel Depth

Posted By: BrianC,Ont
Subject: D17 Flywheel Depth
Date Posted: 21 Jan 2010 at 10:39am

I tried to search and couldn't find the reply. What is the proper depth to grind the flywheel on a 226 gas. Someone posted it after I had the flywheel turned in the D17D that I fixed last summer.

Replies:

Posted By: BrianC,Ont
Date Posted: 21 Jan 2010 at 5:49pm

Can we still search the old forum. The posts for the flywheel depth were on there.

Posted By: mlpankey
Date Posted: 21 Jan 2010 at 5:53pm

cant search the new forum to well let alone the old.

-------------
people if they don't already know it you can't tell them. quote yogi berra

Posted By: MikeB (SD)
Date Posted: 21 Jan 2010 at 6:18pm

Brian are you talking about the flywheel clutch face? I have the 170/175 service manual handy and the flywheel for the 226 gas engine is the same as a D17. If so that face can be ground .0625" maximum. The dimension from clutch mounting face to clutch face surface is 1.437" +/-.005". From clutch face surface to pilot face is 1.157"+/-.01".