Where does the CA Carb Link Spring go?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=6901
Printed Date: 16 Jan 2025 at 12:55pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Where does the CA Carb Link Spring go?
Posted By: Austin(WI)
Subject: Where does the CA Carb Link Spring go?
Date Posted: 20 Jan 2010 at 4:46pm
|
could someone post a picture. I purchase one for my CA and I don't know where to hook it to. I know it goes in the hole on the linkage itself...but there does it connect on the other end? ------------- "Better By Design" |
Replies:
Posted By: mnoonan-NEWI
Date Posted: 20 Jan 2010 at 7:11pm
|
Here's a picture. It looks like it attaches to the manifold bolt. Good luck!
 |
Posted By: GregLawlerMinn
Date Posted: 21 Jan 2010 at 8:20am
| Yep; attaches to the top manifold bolt; large loop over the manifold bolt, small loop thru the throttle rod. I use a piece of heavy wire (coat hanger wire) with a hook on one end and insert it between the block and manifold to pull the spring up over the manifold bolt (after attaching the small loop to the throttle rod such that the opening in the large loop faces forward). |