Farm Equipment - 201 / 226 governor springs

Print Page | Close Window

201 / 226 governor springs

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=6896
Printed Date: 16 Jan 2025 at 11:15am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 201 / 226 governor springs

Posted By: Gary in da UP
Subject: 201 / 226 governor springs
Date Posted: 20 Jan 2010 at 3:36pm

Taking apart an engine and the governor spring has a yellow stripe painted on it , who can tell me what rpm range this spring was intended for and what other colors did Allis use and what were their rated speeds ? Thanks, Gary

Replies:

Posted By: mlpankey
Date Posted: 20 Jan 2010 at 3:42pm

A d17 and 175 spring have blue stripe .They say they are a different shade but it takes the partnumber for me to know the dfference. I think white is a wd spring . I dont know the yellow spring so I guess it would be a wc then again someone could correct me cause I may have the white spring confussed . GLeanor spring has no stripe or slug in the center of the spring.

-------------
people if they don't already know it you can't tell them. quote yogi berra

Posted By: Allis Fields
Date Posted: 20 Jan 2010 at 4:16pm

I got grease on the new one and couldnt tell what paint color it was. I had a wd45 and a d17 new. I used the grased one because it had larger wire and a thicker plungr than the yellow strype one. If I'm rightthe yellow is for wd45 and wd/1700rpm mag.