govner over rideor jurk cable
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=68302
Printed Date: 27 Nov 2024 at 9:11am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: govner over rideor jurk cable
Posted By: bmartin55
Subject: govner over rideor jurk cable
Date Posted: 07 Apr 2013 at 10:18pm
| can any one post picture..would really help..or explain...thanks bob |
Replies:
Posted By: Kip-Utah
Date Posted: 08 Apr 2013 at 11:43am
|
Not too complicated... also not legal anywhere that I know. Just hook it to the carburator throttle control linkage so that you can hold the carb open when the governor tries to close it. Kip ------------- HANSEN'S OLD ORANGE IRON. Showing, Pulling, & Going!! |
Posted By: bmartin55
Date Posted: 08 Apr 2013 at 9:49pm
thanks kip ...they u see over rides in our area..i would like some way to make it not so obvious...aney imput ...runing a wd with e glaner.. thanks bob god bless
|
Posted By: cotncrzy
Date Posted: 10 Apr 2013 at 6:42am
|
We tied one the the linkage using the choke linkage. To be honest I think it hurt it when the load got on it. The govner is way smarter than you, no offence, but it can see changes comming before you can. ------------- C, WD45,WD puller, 185, 200, 7060 Red Belly, 7060 Black Belly,8010, and a R52 Gleaner, AND PROUD OF THEM! |
Posted By: allismanamp
Date Posted: 14 Apr 2013 at 10:27am
|
Guy I knew switched the choke cable to make the governor run faster but as posted that tractor has blown up a lot of times and is not very reliable the guy spends 10 to 15 thousand every 3 years rebuilding everything just his crank alone cost him 5,000 but he claims he is running 8000 rpms! I know his little Allis screams down the track ------------- ~AMP~ |
Posted By: DrAllis
Date Posted: 14 Apr 2013 at 12:25pm
| If these are numbers this "guy" is providing, there's a whole lot of B.S. involved. |
Posted By: Kip-Utah
Date Posted: 14 Apr 2013 at 11:44pm
|
8000 RPMs?! My BS meter just pegged!!! ------------- HANSEN'S OLD ORANGE IRON. Showing, Pulling, & Going!! |