Farm Equipment - What a mess! 7010 PD Tranny

Print Page | Close Window

What a mess! 7010 PD Tranny

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=6768
Printed Date: 16 Jan 2025 at 10:23am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: What a mess! 7010 PD Tranny

Posted By: roscoe
Subject: What a mess! 7010 PD Tranny
Date Posted: 18 Jan 2010 at 11:44am

Why didn't they put a drain plug on the suction screen cover of the 7010 power director tranny? !!

Most of the oil is drained from the transmission at this spot (less than half from the drain-plug), and when you break that thing loose - hello shower!

Since I had it off, I drilled the plate and welded on a 1/2" NF nut, and installed a drain-pan plug. You don't have to do this very often, but having a plug will sure make we want to do it again.

- Rocoe.

Replies:

Posted By: Mike Kroupa
Date Posted: 18 Jan 2010 at 6:07pm

Removing the 3/8 bolt first with the copper washer will do the same thing, might take overnight for all the fluid to drain down. You should always remove the plate and clean the pump intake screen also. HTH, Mike