WD Fluid Level
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=67657
Printed Date: 25 Aug 2025 at 10:01pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WD Fluid Level
Posted By: Carson946
Subject: WD Fluid Level
Date Posted: 26 Mar 2013 at 11:49pm
|
On my Wd how full does the trans need to be? Bottem of fill plug?
I was putting 80/90 in today the level was about 2 inches from the fill plug when I seen just a little gear oil start to drip out of a hole going into the handclutch area.
Another ? I took off a plate on top of the casting going into the beltpully area when I seen a brass fitting with a shield, I got to looking and seen there was some junk in the plug so i do what I do best take off the part! Some Po has put like putty in the brass fitting! Why would they do that?
Thanks Guys
|
Replies:
Posted By: Carson946
Date Posted: 28 Mar 2013 at 11:08pm
|
Someone knows how full the trans needs to be!! I hope |
Posted By: Jim seIl
Date Posted: 28 Mar 2013 at 11:53pm
| There is three places to put oil in on the clutch side of the tractor closest to the front is hydraulics it has a dipstick on it next is hand clutch /pto and it fills to bottom of fill hole (pipe plug) back is trans/ rearend and it fills to bottom of Fill hole (pipe plug) you lost me when you said you seen a little start to drip out of a hole going into the hand clutch area that fill plug is only a 1 inch hole and you would be looking straight down so how could you see that? |
Posted By: Carson946
Date Posted: 29 Mar 2013 at 12:00am
|
I had the cover off the handclutch! and the drain plug off the pto! I put gear oil in the tran/diff then a few mins later I came back and seen gear oil dripping out of the pto!
Looked down into the handclutch and seen a hole with grear oil running out of it.
|
Posted By: Jim seIl
Date Posted: 29 Mar 2013 at 12:16am
| OK that answers the seeing but can't think of a hole between them . how big of a hole maybe a bolt out? |
Posted By: Alex09(WI)
Date Posted: 29 Mar 2013 at 12:22am
|
The trans/diff, hand clutch and PTO all share the same fluid (80-90W). Hydraulic is separate with belt pulley. There are holes between the compartments so when you fill the trans, all compartments fill up. There are also 3 drain plugs for the trans, differential and PTO. What you saw was oil flowing from the trans compartment to the hand clutch part, which is normal.
------------- www.awtractor.com A&W TRACTOR 920-598-1287 KEEPING ALLIS-CHALMERS IN THE FIELDS THROUGH THE 21ST CENTURY |
Posted By: Carson946
Date Posted: 29 Mar 2013 at 12:25am
|
its the size of a ink pin there is no threads in there. I have no clue what the deal is. Im new to aliis. I'll do my best to get a photo of it and post it., IM fixing to get back out on the road for a month. TruckDriver |
Posted By: Carson946
Date Posted: 29 Mar 2013 at 12:28am
So its normal for the 8090 to mix with the hydarulic/Handclutch fluid?
|
Alex09(WI) wrote:Posted By: Carson946
Date Posted: 29 Mar 2013 at 12:31am
| ok i got it now! Srry I had to re read it. |