Pulling Forum - 7000 series pulling tractor

Print Page | Close Window

7000 series pulling tractor

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=67328
Printed Date: 23 Nov 2024 at 1:10pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 7000 series pulling tractor

Posted By: super allis
Subject: 7000 series pulling tractor
Date Posted: 21 Mar 2013 at 9:12pm

wat would be the best route for a clutch to hold up in a 7045

Replies:

Posted By: O.P.S. Heads
Date Posted: 21 Mar 2013 at 9:35pm

It depends completely on how much horsepower you plan on making. Need More information.

Posted By: super allis
Date Posted: 22 Mar 2013 at 9:34am

its probably pushing around 8-900 rite now not really for sure but in that ball park,, clutch hub is shearing the teeth off, puling in a 12,500 and 14,000 open class, everything stock pretty well besides the motor

Posted By: ILGLEANER
Date Posted: 22 Mar 2013 at 9:42am

You aint from Effingham your from Green creek.

-------------
Education doesn't make you smart, it makes you educated.

Posted By: Peterson
Date Posted: 22 Mar 2013 at 5:27pm

What have you got done to this tractor? WHat pump, injectors, turbo or turbo's? We need pics! lol Love to see it.

-------------
7095-685I at 255hp, 8070-225HP,8050-210Hp,8030 with 155HP,220 with 670T engine with A-pump, 7580, 185 with 140HP, 2-6080's,6070, S4 D17,wd45,CA,st34 agco, S1 D17 with 3500MK2

Posted By: DrAllis
Date Posted: 22 Mar 2013 at 6:12pm

The torque limiter hub on the flywheel?? or one of the two internal Power Director hubs ??

Posted By: super allis
Date Posted: 23 Mar 2013 at 12:06am

The power director hub shears off can't slip it like you could a triple disk so it takes a lot to just get it started torque limiter is bolted solid

Posted By: DrAllis
Date Posted: 23 Mar 2013 at 6:06am

I'm too stupid to figure out what you are failing????????? How about the splines inside of the low range clutch housing???....I've never seen any "hub" fail as you describe it.

Posted By: MACK
Date Posted: 23 Mar 2013 at 10:05pm

I would guess he is talking about the teeth on the clutch discs. MACK