Farm Equipment - 125 engine connecting rods

Print Page | Close Window

125 engine connecting rods

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=6725
Printed Date: 16 Jan 2025 at 8:02am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 125 engine connecting rods

Posted By: Dave(NEPA)
Subject: 125 engine connecting rods
Date Posted: 17 Jan 2010 at 2:57pm

We've been on and off trying to restore my Dad's C since last winter. We bought another block off of Phil, a forum member here, and got a rebuild kit for it including the over bore pistons and sleeves. All ready to put the engine together and the connecting rods got pretty well buggered up when we were cutting the pistons out of the old sleeves (yeah it was that rusty) I can save a couple but will need at least two. If anyone has any spares or new ones they don't need I'll buy them off you. Also found three pushrods bent (we tried to unstick the old motor a few times before we saw how bad it was). thanks for your help.

Replies:

Posted By: Fred in Pa
Date Posted: 17 Jan 2010 at 6:42pm

Dave I have about a 100 push rods and a bunch of connecting rods .Call me monday after 8 am 717-451-6590

Posted By: DocsEquipment,IL.
Date Posted: 18 Jan 2010 at 8:17am

i also would have the parts you need 309-246-2900 Doc