All-Crop 40 dimensions
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=6694
Printed Date: 16 Jan 2025 at 7:59am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: All-Crop 40 dimensions
Posted By: TomYaz
Subject: All-Crop 40 dimensions
Date Posted: 16 Jan 2010 at 7:19pm
|
Hi Folks,
Need to know overall dimensions of the all crop 40:
Width
Length
Height
Outside wheel base
Rebuilding my website and need this info...dont have it in my manual.
Thanks!!!
Tom
|
Replies:
Posted By: GlenninPA
Date Posted: 16 Jan 2010 at 7:26pm
| You know, I have a brochure with that info on the back page, but, now, where did I put it.....???? CRS setting in. |
Posted By: BrettPhillips
Date Posted: 16 Jan 2010 at 8:18pm
|
It's Tiny. Overall Width: 7'-10" Length: 16'-3" Height over (clean grain) elevator: 7'-1" Tread width: 6'-10" Shipping weight: ~1730 lbs Bin Capacity: 11 Bushels Cylinder: 15" dia. x 36" wide Separating area: 16 sq. feet Cutter Bar: 40" Header width: 45" between divider points. |
Posted By: TomYaz
Date Posted: 17 Jan 2010 at 12:33am
Thanks Brett,
Now for a Sunday chore; can you measure the outside wheelbase?
Tom
|
BrettPhillips wrote:Posted By: Wil M (NEIA)
Date Posted: 17 Jan 2010 at 6:55am
|
Don't know what the outside wheel base is for sure but it will fit on a 101 inch trailer with some room to spare so I bet what Bret posted for overall width is the wheel base. I hauled mine home on a 4 place snowmobile trailer.... Wil------------- "Yet there are soulless men whose hand and brain tear down what time will never give again." Anderson M Scruggs |
Posted By: TomYaz
Date Posted: 17 Jan 2010 at 7:20am
overall width.
|
Posted By: EricTn
Date Posted: 17 Jan 2010 at 7:29am
| That would probably be the tread width Brett listed as 6"10". Eric in TN. |
Posted By: GlenninPA
Date Posted: 17 Jan 2010 at 12:31pm
| It strikes me that the overall width is 7' 4", but that is from memory, which I know is failing.... |
Posted By: TomYaz
Date Posted: 17 Jan 2010 at 2:12pm
Gee Loweeze he did state that! Guess I need my eyes checked..
Thanks!
|
Posted By: BrettPhillips
Date Posted: 18 Jan 2010 at 8:35am
|
Tom: The data I posted came from the back page of a model 40 sales brochure. I know that they haul comfortably on an 8 ft. wide trailer. If you need more data, I can measure my 40, but it is tucked in the back of the shed and access is a bit tight at the moment. |
Posted By: TomYaz
Date Posted: 18 Jan 2010 at 8:52am
No need Brett, you had everything I needed, I just didnt see it!
Thanks!
Tom
|