Oil Level???
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=65926
Printed Date: 30 Oct 2025 at 6:43pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Oil Level???
Posted By: cotncrzy
Subject: Oil Level???
Date Posted: 25 Feb 2013 at 2:46pm
On my WD puller, I have reworked the hand clutch. What is the minimum oil level once the pto and hyd. pump is removed? Does it still need to be to the "FULL" level?
-------------
C, WD45,WD puller, 185, 200, 7060 Red Belly, 7060 Black Belly,8010, and a R52 Gleaner, AND PROUD OF THEM!
|
Replies:
Posted By: MACK
Date Posted: 18 Mar 2013 at 7:05am
|
If you have removed all the gears, it needs to be up about 2" on clutch. Best thing would be to remove clutch and use sealed bearings and run no oil. MACK
|
Posted By: cotncrzy
Date Posted: 18 Mar 2013 at 7:20am
This tractor was bought as a "puller". I changed all the oils over the winter. Every compartment was full of what looked to be 140wt gear oil/water. I put hyd oil back in the hdy section, and also in the hand clutch section. Filled the differential and final drives with 80/90. Everything is to the full level, could I loose a significant amount of weight by lowering the oil levels with damaging anything?
-------------
C, WD45,WD puller, 185, 200, 7060 Red Belly, 7060 Black Belly,8010, and a R52 Gleaner, AND PROUD OF THEM!
|
|