Pulling Forum - compression height

Print Page | Close Window

compression height

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=64358
Printed Date: 23 Nov 2024 at 12:10pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: compression height

Posted By: mufflerboltz
Subject: compression height
Date Posted: 01 Feb 2013 at 7:49am

can anyone tell me if there is a difference in compression between the allis 226 4in bore piston and a case DC 4in bore piston?

Have an idea but want to make sure it works out or if i am just wasting my time!

Thanks

Replies:

Posted By: mufflerboltz
Date Posted: 01 Feb 2013 at 7:50am

I do not have the books nor both sets of pistons on hand to check for myself so any help would be great

Posted By: mlpankey
Date Posted: 01 Feb 2013 at 8:12am

Mufflerboltz go over to yt pulling forum mel or dboll will know they are case men.

-------------
people if they don't already know it you can't tell them. quote yogi berra

Posted By: wi50
Date Posted: 01 Feb 2013 at 9:00am

I don't know about the DC, but also check out John Deere 3010 gas engines.... I looked one time and did a little quick math and thought them to be a good cantidate if trying to modify an Allis on the cheap. I'll be gong to the salvage yard for some items soon and I'll try to take a quick look and measure, estimate bowl volume, etc. Maybe even later on today. I'll be heading down through New Glarus next thursday possiably.

-------------
"see what happens when you have no practical experience doing something...... you end up playing with calculators and looking stupid on the internet"