Pulling Forum - D17 pistons & sleeves fit WC?

Print Page | Close Window

D17 pistons & sleeves fit WC?

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=62400
Printed Date: 23 Nov 2024 at 6:43am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D17 pistons & sleeves fit WC?

Posted By: co2tom
Subject: D17 pistons & sleeves fit WC?
Date Posted: 31 Dec 2012 at 1:57pm

I have been told that I can put WD45 pistons & sleeves in my WC & I have read on here that D17 pistons & sleeves will fit in a WD45. So...my question is can I put the D17 stuff in my WC? Will modifications be necessary? I already plan on putting a WD45 crank in it if that makes any difference. What is the cheapest or best place to get parts? Thanks.

Replies:

Posted By: CAL(KS)
Date Posted: 31 Dec 2012 at 3:00pm

pistons yes, difference being compression ratio. sleeves may be slightly different im not sure but i think they are the same but bearings and seal kits will be different than wd45

im sure the vendors that advertise on the sight would be happy to piece together a parts kit for you

-------------
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20

Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15

Posted By: Kip-Utah
Date Posted: 03 Jan 2013 at 9:22pm

You CAN use WD, WD45, D17, 170, or 175 sleeves and pistons in your WC with WD45 crank...Either 4" or 4.125" variety. Kip

-------------
HANSEN'S OLD ORANGE IRON. Showing, Pulling, & Going!!