Construction and other equipment - steering clutches on hd4

Print Page | Close Window

steering clutches on hd4

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=61582
Printed Date: 26 Jun 2025 at 2:17pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: steering clutches on hd4

Posted By: Randaleky
Subject: steering clutches on hd4
Date Posted: 14 Dec 2012 at 7:38pm

I HAVE A QUESTION ABOUT HD4 STEERING CLUTCHES. THE PICTURES IN BOOKS ARE BLURRY AND I NEED TO MAKE SURE OF THIS . WHEN TIGHTENING THE 6 BOLTS FOR FINAL ASSEMBLY. THE SPRING LOADED FACE PLATE LEGS SHOULD MAKE CONTACT WITH THE BRAKE DRUM AND THEN A TORQUE OF 25 LBS ON EACH BOLT IS WHAT I UNDERSTAND FROM BOOK. AFTER THAT THE ADJUSTMENTS ON THE THREE CLUTCH LEVERS TO GIVE THE 2 1/8 INCH DISTANCE FROM LAST CLUTCH RING TO WHERE CONTACT IS MADE ON THE THREE FINGERS. IS THIS CORRECT FOR ASSEMBLY ? THANKS RANDAL