ditch witch v30 crowd lever?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=60682
Printed Date: 25 Jun 2025 at 9:01pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: ditch witch v30 crowd lever?
Posted By: Mrgoodwrench
Subject: ditch witch v30 crowd lever?
Date Posted: 27 Nov 2012 at 9:05pm
last winter we picked up a v30 for the farm. seems to work good haven't used it too much. there it a hyd lever labled "crowd" but it doesn't seem to do anything. does anyone know what this is for?
-------------
There are 3 ways to do job GOOD, FAST, CHEAP. YOU MAY CHOOSE 2. If its FAST & CHEAP it won't be GOOD, if it's GOOD & CHEAP it won't be FAST, and if its GOOD & FAST it won't be CHEAP!!!!
|
Replies:
Posted By: Allen Dilg
Date Posted: 27 Nov 2012 at 10:15pm
|
Hello Mr Goodwrench Haven't worked on any trenchers in a very long time Creep and crowd should be the same. There should be a hyd flow control valve in that line that adjusts crowd speed, and the crowd lever to start and stop movement also it should reverse direction. Good Luck
|
Posted By: Mrgoodwrench
Date Posted: 27 Nov 2012 at 10:22pm
i assume you mean reverse the cutter ...i thought that but it must not work...guess i need a operators manual
-------------
There are 3 ways to do job GOOD, FAST, CHEAP. YOU MAY CHOOSE 2. If its FAST & CHEAP it won't be GOOD, if it's GOOD & CHEAP it won't be FAST, and if its GOOD & FAST it won't be CHEAP!!!!
|
Posted By: Coke-in-MN
Date Posted: 28 Nov 2012 at 9:55am
http://ditchwitchv30.informationconcerning.com/
-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."
|
|