Construction and other equipment - Oil type for trans. & finals on HD6E

Print Page | Close Window

Oil type for trans. & finals on HD6E

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=59675
Printed Date: 31 Oct 2024 at 9:38pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Oil type for trans. & finals on HD6E

Posted By: drtdmn
Subject: Oil type for trans. & finals on HD6E
Date Posted: 08 Nov 2012 at 3:27pm

Can anyone tell me what type oil is used in the transmission and the final drives of a 1959HD6E? I believe its 90W but i dont know if that is mineral or gear?

Replies:

Posted By: gemdozer
Date Posted: 08 Nov 2012 at 4:25pm

You need 80-90w oil gear for transmission and final drive

Posted By: drtdmn
Date Posted: 08 Nov 2012 at 5:31pm

Thank's and That would be straight 80-90 and not mineral?

Posted By: Dozer
Date Posted: 09 Nov 2012 at 4:11pm

The operators manual says SAE 50W above 32 degrees and SAE 30W below 32. 90 wt EP oil is a good choise and works well. I am presently using a universal transmission/hydraulic oil because it is less expensive and the HD6's take a lot of oil. In my opinion it is very important to completely drain the old oil because these old machines collect a lot of dirt and condensation. I found a lot of water in my final drive and hydraulic system.