Construction and other equipment - allis chalmers grader in a junk yard

Print Page | Close Window

allis chalmers grader in a junk yard

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=56913
Printed Date: 26 Nov 2024 at 4:45pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: allis chalmers grader in a junk yard

Posted By: EClark
Subject: allis chalmers grader in a junk yard
Date Posted: 15 Sep 2012 at 8:12pm

don't know much about it but today I spotted a road grader in the scrap yard. older allis with what looks to be a wd motor in it. didn't know if any of you guys would want any info. if so I could get some pictures,and get the scrap man to hold off. let me know

Eric

Replies:

Posted By: Eric B
Date Posted: 18 Sep 2012 at 10:55pm

You've got the right idea, problem is the distance for me. You're likely to raise some local interest if you post a picture or two. By looking at the visits on this forum it's always the picture ones that get the most attention (even the old and the ugly machines Thumbs Up

)

Posted By: DonBC
Date Posted: 19 Sep 2012 at 11:06am

Eric is correct that a couple of pictures would draw some interest. There is always a market for parts for these graders as, except for the engine, the only source of parts are salvaged parts. For example I have been trying to find the angle (worm) drive for the power circle and have had no luck in finding a salvage machine that was equipped with a power circle. It is not that large of a component so shipping would not be a major issue. Eric, I see that you are also from BC. Do you have a D grader?

-------------
Jack of all trades, master of none

Posted By: Eric B
Date Posted: 19 Sep 2012 at 1:06pm

DonBC wrote:

Eric is correct that a couple of pictures would draw some interest. There is always a market for parts for these graders as, except for the engine, the only source of parts are salvaged parts. For example I have been trying to find the angle (worm) drive for the power circle and have had no luck in finding a salvage machine that was equipped with a power circle. It is not that large of a component so shipping would not be a major issue. Eric, I see that you are also from BC. Do you have a D grader?

Hi Don:
No I don't have a model D grader but now that I know you're searching for that part I'll keep you in mind when I come across one and send you an email. I have had a number of A-C industrial machines over the years so I tend to pay attention when discovering what's around. (I'm in the lower mainland)