Construction and other equipment - allis chalmers h3 dozer

Print Page | Close Window

allis chalmers h3 dozer

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=56856
Printed Date: 21 Sep 2024 at 1:11am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: allis chalmers h3 dozer

Posted By: jughead
Subject: allis chalmers h3 dozer
Date Posted: 14 Sep 2012 at 5:11pm

need to know what fluids it takes and part numbers for filters. no one in my area seems to know anything about them

Replies:

Posted By: Gary
Date Posted: 14 Sep 2012 at 5:24pm

Hi Milburn

Welcome to the greatest Tractor Forum going.

Lots of good info available here.

The H3 - Gas, and HD3 - Diesel - are based on the Allis D-15 Model Tractor.

Early ones I think were 149 cu.in.

Later ones were 160 cu.in and use a Fram PH8A.

Gary

Posted By: jughead
Date Posted: 14 Sep 2012 at 5:59pm

thanks need all the help i can get. little dozer looks like it doesnt have a lot of hours on it but needs a lot of tender loving care. wont steer to the left but will deal with that as time goes by

Posted By: jughead
Date Posted: 16 Sep 2012 at 7:38pm

any suggestions on fluid to use in final drive on my h3 dozer.

Posted By: acjwb
Date Posted: 16 Sep 2012 at 9:03pm

The manual calls for 80 ep oil in the final drives. Transmission calls for 10w-30 and the shuttle clutch also. They are a nice little machine. Surprising what they will push.

Posted By: jughead
Date Posted: 17 Sep 2012 at 4:56am

thank u acjwb.bought 2 manuals but neither of them gave any info on fluids

Posted By: Gary
Date Posted: 17 Sep 2012 at 6:34am

Joe

What Manual are you reding in - Title, Form number ?

I have never heard of using Detergent Oil in a transmission,

- and especially not in the Shuttle Housing.

In my H-3 HD-3 Operators Instructions:

P.14 Engine - SAE 10W winter and SAE 20W summer

P.16 Hydraulic - SAE 20-20W

Transmission - SAE 20-20W

Final Drives - 20-20W

Shuttle - 20-20W

If it were mine I would use:

10W30 in Engine

Trans. Hydraulic in Hydraulic and Shuttle

80 / 90 in Transmission and Final Drives.

Gary

Posted By: acjwb
Date Posted: 17 Sep 2012 at 7:01pm

Gary
I am getting my information from my operators instructions, form TM-415, for serial # 8694 and up. Page 17, Lubrication and service guide. Transmission, 10w30 viscosity oil. Final drives, 80ep oil. Power director or shuttle clutch, 10w-30 oil. Just what the manual says. My manual is for the latter models.

Posted By: jughead
Date Posted: 21 Sep 2012 at 7:53am

would anyone have a pic of the dipsticks or gauges to check the fluid in an h-3. engine oil is obvious. old man must be getting blind in his old age