powershift rebuild
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=56190
Printed Date: 23 May 2025 at 3:47am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: powershift rebuild
Posted By: AC 426 power
Subject: powershift rebuild
Date Posted: 01 Sep 2012 at 3:00pm
| Any one know how much it will cost for a 1976 7060? No labor just parts thanks |
Replies:
Posted By: Lynn Marshall
Date Posted: 01 Sep 2012 at 4:12pm
       The gasket set is around $425.00.That includes all the gaskets,O-rings,sealing rings for the clutch packs,new stake nuts for the shafts,and assorted other goodies to do the job.The friction discs are around $125.00 a piece.Usually the discs last a long time.The teeth inside the discs can get partially sheared or sharp.If you don't need any hard parts (housings,gears,castings) they are not super expensive to work on.The special tools and a service manual are certainly a plus to have if you are going to do it yourself.
|
Posted By: AC 426 power
Date Posted: 01 Sep 2012 at 4:58pm
| Alright thanks how many friction disks are there? |
Posted By: rw
Date Posted: 01 Sep 2012 at 7:31pm
|
We did ours about 2 years ago and it was about $2000 for all the rubber parts and springs that separate the clutches. Ours had the threaded neck broken off of the front clutch hub. that part new was 2500 or so. If I were you I'd have that part magna-fluxed before I put it together. RW |
Posted By: rw
Date Posted: 01 Sep 2012 at 7:33pm
|
I believe we put all new clutches in too. RW |