Farm Equipment - Series III D17D Hyd Arms

Print Page | Close Window

Series III D17D Hyd Arms

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=55336
Printed Date: 14 Nov 2024 at 12:46am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Series III D17D Hyd Arms

Posted By: BrianC,Ont
Subject: Series III D17D Hyd Arms
Date Posted: 16 Aug 2012 at 7:30am

wont go down. I have a long pipe on them and still cant get them to move. I tried to do a search on this topic, but cant seem to find anything. The lever on the steering column is moving alright. Do the three levers by the left fender have anything to do with the hyd arms or just the remotes. If I can get them working I might trade it for a 70 Buick Electra 225 that came from Kansas.

-------------
35WC on steel, B with belly mower, D17 puller, D15 Series II puller, D15 Series II with loader, 608 Lawn Tractor

Replies:

Posted By: Henry se/k!
Date Posted: 16 Aug 2012 at 7:55am

Holding forward on out side control should do it.

Posted By: DrAllis
Date Posted: 16 Aug 2012 at 7:57am

One of the three levers on your left (when sitting in the seat) needs to be held downward for the valve stack you're using.

Posted By: BrianC,Ont
Date Posted: 16 Aug 2012 at 5:19pm

I left the 12ft piece of 2" square tubing hanging on the 3ph arm last night. It was in the down postion this morning. I will see if it comes back up after I get the loader hose repaired.

-------------
35WC on steel, B with belly mower, D17 puller, D15 Series II puller, D15 Series II with loader, 608 Lawn Tractor