Farm Equipment - Sealing F2 variable speed drive

Print Page | Close Window

Sealing F2 variable speed drive

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=55219
Printed Date: 18 Sep 2025 at 6:27am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Sealing F2 variable speed drive

Posted By: ScottinSWIL
Subject: Sealing F2 variable speed drive
Date Posted: 13 Aug 2012 at 9:21pm

Can someone give me the best way to go about removing the large nut on the variable speed on a gear drive F2. I'm mainly wandering about what the best way is to secure the shaft from turning without damaging anything. I realize a large impact would probably do the trick, but I do not have one avaliable at the moment. To be clear I am talking about the variable speed for the tranmission. I have the two large O-rings on hand as well as wanting to update the fitting that the oil line attaches to. Thanks

Replies:

Posted By: MI8050
Date Posted: 14 Aug 2012 at 4:08am

big pipe wrench. When I did the K2 it wasn't exceptionally tight. The vvar speed drive bearings were the achilles heel on the K2 for me.