Farm Equipment - D-14 PA rims $$ ???

Print Page | Close Window

D-14 PA rims $$ ???

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=55204
Printed Date: 22 May 2025 at 2:45am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D-14 PA rims $$ ???

Posted By: jaybmiller
Subject: D-14 PA rims $$ ???
Date Posted: 13 Aug 2012 at 5:53pm

Ok..finally got one PA rim all restored and when for the other on D-14#3...it's kaput, shot, all gone.Mangled the rim(what was left) getting the tire off.

So the big buck question...what's a good PA rim cost these days ?

should I just find another combine rim ?

All words of Wisdom appreciated.

Jay

-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)

Never burn your bridges, unless you can walk on water

Replies:

Posted By: DiyDave
Date Posted: 13 Aug 2012 at 6:28pm

If you're good with a welder, you could cut the rails off, and weld them on a new blank rim. Check with M.E. Miller tire, they might have a listing for a 26" PA rim. Guess would be around $350 or more + shipping, per rim.

Posted By: Dakota Dave
Date Posted: 13 Aug 2012 at 7:15pm

took me a whole minute to look up on tonystractors. $265 each. I put two new on my WD45 last year. I've repaired rims in the past but you just can't beat a new rim. If you have a tire dealer near you they can order you a rim. Big jims tires here could get me new rims for about the same as ordering and having one shipped.

Posted By: norm[ind]
Date Posted: 13 Aug 2012 at 7:20pm

have a used rim from dads tractor installed new rims 1-574-342-4545

Posted By: ryan(IN)
Date Posted: 13 Aug 2012 at 7:23pm

Norm I may be interested in that if jay isn't going your route. I got a bad one on my D-14.

-------------
ryan
1984 8070 FWA,1979 7060,1975 7040,1971 190,1960 D-17D,1957 D-14, 196? D-19G, 1975 5040,1971? 160,1994 R62