2 way plows on a B
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=54726
Printed Date: 16 Jan 2025 at 4:44am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 2 way plows on a B
Posted By: MNLonnie
Subject: 2 way plows on a B
Date Posted: 04 Aug 2012 at 9:50am
|
I picked up a pair of plows this morning to put on my steel wheel B. I'm not sure if I have all the parts I need so if anyone has some pics of them mounted that would be great. Thanks
Not sure what happened on my pic?
 ------------- Waukesha B, B, IB, G, styled WF, D15, 615 backhoe, 2-Oliver OC3's, 4 Ford Model T's, 3 Model A Fords, AV8 Coupe, AV8 Roadster, 1933 Ford Wrecker |
Replies:
Posted By: MNLonnie
Date Posted: 04 Aug 2012 at 10:20am
|
I dumped out my garbage can full of parts that came with the plows but I don't think there is much for plow parts in there. Anything look familiar?
Looks like a swinging draw bar, hydraulic line, wooden pitman arm and other stuff.
 ------------- Waukesha B, B, IB, G, styled WF, D15, 615 backhoe, 2-Oliver OC3's, 4 Ford Model T's, 3 Model A Fords, AV8 Coupe, AV8 Roadster, 1933 Ford Wrecker |
Posted By: Gary
Date Posted: 04 Aug 2012 at 10:31am
|
Here are a couple links: Gary http://allischalmersmuseum.com/component/option,com_easygallery/act,photos/cid,10/Itemid,29/" rel="nofollow - http://allischalmersmuseum.com/component/option,com_easygallery/act,photos/cid,10/Itemid,29/ http://www.allischalmers.com/forum/forum_posts.asp?TID=48600&title=twoway-plow-info" rel="nofollow - http://www.allischalmers.com/forum/forum_posts.asp?TID=48600&title=twoway-plow-info
|
Posted By: JohnCinMd
Date Posted: 04 Aug 2012 at 1:32pm
|
Gonna try to add several pictures of the plows on my B...      |
Posted By: JohnCinMd
Date Posted: 04 Aug 2012 at 1:34pm
    
|
Posted By: Ted in NE-OH
Date Posted: 04 Aug 2012 at 1:41pm
Quick look , it appears that you are missing the front plow drawbar and the brackets that attach it to the bull gear housing. Also missing one hydraulic cylinder and the left-right hydraulic switch. Good luck.
------------- CA, WD, C, 3 Bs, 2 Gs, WC, I-400, 914 |
Posted By: MNLonnie
Date Posted: 04 Aug 2012 at 2:15pm
|
The pics help a lot, guess I need to find more parts. ------------- Waukesha B, B, IB, G, styled WF, D15, 615 backhoe, 2-Oliver OC3's, 4 Ford Model T's, 3 Model A Fords, AV8 Coupe, AV8 Roadster, 1933 Ford Wrecker |
Posted By: norm[ind]
Date Posted: 04 Aug 2012 at 6:56pm
| did not see the two way valve |
Posted By: Murph-NC
Date Posted: 04 Aug 2012 at 8:16pm
|
Lonnie, nice find. Must be a good day for plows, as just this morning I picked up the left hand plow I've been searching for quite a while. ------------- '41 C w/Woods L503 mower, #3 mower, 2-way plows for C |
Posted By: MNLonnie
Date Posted: 04 Aug 2012 at 8:44pm
|
Ok, I scrounged around out back and found the front plow bar and the final drive brackets. I only have one of the clamps to hook the plow to the bar but I could make one of those if I had to. Problem is my B is missing the rock shaft and it's an early hand brake B with the low seat brackets so that is the most needed part at this point. ------------- Waukesha B, B, IB, G, styled WF, D15, 615 backhoe, 2-Oliver OC3's, 4 Ford Model T's, 3 Model A Fords, AV8 Coupe, AV8 Roadster, 1933 Ford Wrecker |
Posted By: MNLonnie
Date Posted: 08 Aug 2012 at 6:33pm
Well I finally found the parts I needed and got them all mounted up. I don't have the plumbing hooked up yet but I have cylinders. For now there is a piece of steel in place of the cylinders to hold them up, that'll have to do for the local show this weekend. Had to put the engine weights on to help keep the front end on the ground. Thanks for all the pics and info.
  ------------- Waukesha B, B, IB, G, styled WF, D15, 615 backhoe, 2-Oliver OC3's, 4 Ford Model T's, 3 Model A Fords, AV8 Coupe, AV8 Roadster, 1933 Ford Wrecker |
Posted By: Murph-NC
Date Posted: 08 Aug 2012 at 7:52pm
|
Looks great Lonnie. Makes me want to put the rear steel and 2 way plows on my C... but I really don't have plans to do it anytime soon, I've just gathered the pieces of the puzzle for now. ------------- '41 C w/Woods L503 mower, #3 mower, 2-way plows for C |
Posted By: MikeinLcoMo
Date Posted: 08 Aug 2012 at 7:59pm
| Murph, load your fax. Operator manual coming in the AM. I'll work up the parts manual if you need it also. Mike |
Posted By: Murph-NC
Date Posted: 08 Aug 2012 at 8:05pm
|
Mike, thanks so much for the help. The fax will be ready. It was mainly the OAN article I was wanting, as I just confirmed I have the "Operating Instructions and Repair Parts Illustrations" manual. Thanks again. ------------- '41 C w/Woods L503 mower, #3 mower, 2-way plows for C |
Posted By: Bill Long
Date Posted: 08 Aug 2012 at 8:14pm
|
Neat looking unusual Steel Wheeled B. You have a treasure there. If you can get the rams, hoses, and valve you will have an outstanding rig. Thanks for taking such good care of my favorite. Good Luck! Bill Long |