finally got to mow with this today...
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=54370
Printed Date: 24 Sep 2024 at 4:24pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: finally got to mow with this today...
Posted By: jb from md
Subject: finally got to mow with this today...
Date Posted: 29 Jul 2012 at 4:02pm
my 41 "c" with woods L59. the mower came off of a b but i got the bracket for the c right from the woods dealer. got it adjusted and it works great. now dad makes a pass with the riding tractor to get close to the barns and trees and i can get the rest with this, mowing goes alot faster now....Jb  ------------- 8050 FWA, 190XT, 185, Styled wc, Unstyled wc, (2)C, (2)WD45NF, WD45WF, WD,416h, 716h, 312h, 8070 pedal. |
Replies:
Posted By: Ryan Renko
Date Posted: 29 Jul 2012 at 6:33pm
| The tractor looks great!!! When we were not at the farm we lived in a small subdivision of about 30 or so lots. The developer of the land would use this same set up to mow the unsold lots in the summer. I recall him as if it was yesterday but its been 30++ years ago. He was in his 60's, floppy hat on, cigar in his mouth and sunglasses. What amazed me is he would be mowing along and hit something with the mower that would "scare the sh*t" out of any other tractor operator but it would not faze him one bit!!! Just kept that calm appearance and kept right on mowing. I later used the tractor to mow with when his health declined. R.I.P. Mr. Flagg!!!! Ryan |
Posted By: PlayGun
Date Posted: 29 Jul 2012 at 9:57pm
|
Man could do some real mowing with that setup, good lookin too. ------------- Hopefully Future AC Man! Ride With Jesus my friends! Lonas |
Posted By: Flint23
Date Posted: 30 Jul 2012 at 2:07am
More fun mowing too I bet.... ------------- been there done that, not doing it again... |
Posted By: Steve in NJ
Date Posted: 30 Jul 2012 at 6:15am
| You can absolutely do some serious mowin' with that setup! And have a lot of fun to!! mailto:Steve@B&B" rel="nofollow - Steve@B&B |
Posted By: Jim Lindemood
Date Posted: 30 Jul 2012 at 7:01am
| That should do it just fine -- |
Posted By: bitburn
Date Posted: 30 Jul 2012 at 7:50am
Were you able to order the bracket from the woods dealer in one piece? A Woods dealer near me told me I had to create a list and order all the parts individually: Bracket, Idler Pulleys, pto pulley, shields etc. which I expect is more expensive than buying the piece as an entire assembly. They told me unless I bought the entire mowing system, I had to buy individual parts and pieces. |
jb from md wrote:Posted By: jb from md
Date Posted: 30 Jul 2012 at 5:36pm
|
i bought the setup as it came off the B i only ordered the bracket for the C as i was able to use the pulleys ,gaurds and everything else from the B bracket. go to thier website and you can look up the parts yourself. i printed off the manual and it helped setting it up to mow properly and how to properly route the belt....Jb ------------- 8050 FWA, 190XT, 185, Styled wc, Unstyled wc, (2)C, (2)WD45NF, WD45WF, WD,416h, 716h, 312h, 8070 pedal. |